Star Wars: Attack of the Clones – Clone Pilot, Battle Droid, Clone Trooper, R2-D2, and C-3PO by Hot Toys

Hot Toys has kicked off May the 4th 2022 with five 1/6 scale figure announcements. They have released photos and details for the Star Wars: Episode 2 – Attack of the Clones versions of the Clone Pilot, a Geonosis Battle Droid, a Clone Trooper, R2-D2, and C-3PO. These figures are scheduled for release between the Second and Third Quarters of 2023. Pre-orders aren’t live just yet. You can see the new photos and full details by reading on.

Star Wars Episode II: Attack of the Clones Clone Trooper 1/6th Scale Collectible Figure

At the time of their introduction, the Republic clone troopers represented the future of galactic warfare. Far superior to battle droids, the clone troopers formed the backbone of the Republic’s new military that waged war against the forces of the Confederacy of Independent Systems.

In celebrating the 20th anniversary of Star Wars: Attack of the Clones, Hot Toys is delighted to introduce a series of collectibles based on this film for fans!

The 1/6th scale Clone Trooper collectible figure features greatly detailed armor and helmet, two styles of blaster rifles, an interchangeable Phase 2 Clone Trooper helmet as seen in Star Wars: Revenge of the Sith™, an attachable backpack, a figure base, and a special designed commemorative packaging!

Grow your clone army now with this new Clone Trooper collectible figure!

Specifications
– Product Code: MMS647
– Product Name: Clone Trooper™
– Height: Approximately 30 cm tall
– Points of Articulations: 30
– Special Features: Finely crafted Clone Trooper (Phase 1) helmet with weathering effects, interchangeable helmet
– Product Release Date: Approximately Q2 – Q3, 2023

The 1/6th scale Clone Trooper™ Collectible Figure specially features:
– Authentic and detailed likeness of Clone Trooper in Star Wars Episode II: Attack of the Clones
– Finely crafted Clone Trooper (Phase 1) helmet with weathering effects
– Skillfully applied weathering effects on armors, weapons, and accessories
– Body with over 30 points of articulations
– Approximately 30 cm tall
– Eight (8) pieces of interchangeable gloved hands including:
– One (1) pair of hands for holding guns
– One (1) pair of relaxed hands
– Two (2) pair of gesture hands
– Special package design with Star Wars: Attack of the Clones 20th Anniversary logo

Costume:
– One (1) finely crafted Clone Trooper armors
– One (1) white belt
– One (1) black colored under-suit
– One (1) pair of white colored boots

Weapons:
– One (1) rocker launcher
– One (1) blaster rifle
– One (1) blaster pistol

Accessories:
– One (1) backpack with cover and weathering effects
– One (1) interchangeable Clone Trooper (Phase 2) helmet
– Specially designed figure stand with Star Wars logo and character nameplate

—————————————–

Star Wars Episode II: Attack of the Clones Clone Pilot 1/6th Scale Collectible Figure

During the Republic era, Clone Troopers were selected to be trained to become pilots to fly a variety of ships for the Clone army. In the battle of Geonosis™, they flew Republic Attack Gunships to support the Jedi™ in the fight with the Separatists.

To celebrate the 20th anniversary of Star Wars: Attack of the Clones, Hot Toys is delighted to introduce a series of collectibles based on this landmark film for fans!

The new 1/6th scale Clone Pilot collectible figure features a specialized Clone Pilot helmet, an interchangeable Clone Pilot helmet, a detailed armor with weathering effects, two styles of blasters, a pair of binoculars, thermal detonators, and a figure base!

Add another member to your clone army today!

Specifications
– Product Code: MMS648
– Product Name: Clone Pilot™
– Height: Approximately 30 cm tall
– Points of Articulations: 30
– Special Features: Finely crafted Clone Trooper helmet (Phase I) with pattern and weathering effects, interchangeable Clone Pilot helmet
– Product Release Date: Approximately Q2 – Q3, 2023

The 1/6th scale Clone Pilot™ Collectible Figure specially features:
– Authentic and detailed likeness of Clone Pilot in Star Wars Episode II: Attack of the Clones
– Finely crafted Clone Trooper helmet (Phase I) with pattern and weathering effects
– Specially applied weathering effects on armor, weapons, and accessories
– Body with over 30 points of articulations
– Approximately 30 cm tall
– Six (6) pieces of interchangeable gloved hands including:
– One (1) pair of hands for holding guns
– One (1) pair of relaxed hands
– One (1) pair of gesture hands
– Special package design with Star Wars: Attack of the Clones 20th Anniversary logo

Costume:
– One (1) Clone Pilot armor with chest panel
– One (1) white belt
– One (1) black colored under-suit
– One (1) pair of white colored boots

Weapons:
– One (1) blaster rifle
– One (1) blaster pistol

Accessories:
– One (1) interchangeable Clone Pilot helmet
– One (1) binoculars
– Two (2) thermal detonators
– Specially designed figure stand with Star Wars logo and character nameplate

—————————————–

Star Wars Episode II: Attack of the Clones Battle Droid (Geonosis) 1/6th Scale Collectible Figure

Rather than use flesh-and-blood warriors, the Separatists prefer mindlessly loyal soldiers that are easily controlled. The soulless ranks of their armies are dominated by tall, thin B1 battle droids built as mechanical imitations of their Geonosian™ designers.

Celebrating the 20th anniversary of Star Wars: Attack of the Clones, Hot Toys is excited to present a series of collectibles based on this landmark film for fans!

The new 1/6th scale Battle Droid collectible figure is inspired by the droid’s appearance in the Geonosis™ arena battle. It features a newly developed mechanical structure with exceptional articulations, a blaster rifle, a pair of binoculars, a sand themed figure base, an interchangeable C-3PO™ head recreating the comical scenes when the droids were misconfigured, and a specially designed commemorative packaging!

It is now a great time to add battle droids into your Star Wars™ collection!

Specifications
– Product Code: MMS649
– Product Name: Battle Droid™ (Geonosis)
– Height” Approximately 32cm tall in standing pose
– Points of Articulations: 26
– Special Features:Beautifully crafted head and armors in reddish brown applied with weathering effects
– Product Release Date:Approximately Q2 – Q3, 2023

The 1/6th scale Battle Droid™ (Geonosis) Collectible Figure specially features:
– Authentic and detailed likeness of Battle Droid (Geonosis) in Star Wars Episode II: Attack of the Clones
– Beautifully crafted head and armors in reddish brown applied with weathering effects
– Approximately 32cm tall in standing pose; approximately 14cm tall after bending
– Newly developed body with over 26 points of articulations
– Special features including:
– Highly accurate mechanical body design
– One (1) pair of articulated mechanical graspers
– Enhanced articulations on waist which allow flexible movement including fully bending
– Special package design with Star Wars: Attack of the Clones 20th Anniversary logo

Weapon:
– One (1) blaster rifle

Accessories:
– One (1) C-3PO mechanical head with LED light-up function (yellow light, battery operated)
– One (1) set of antennas (attachable to figure’s back)
– One (1) backpack with extendable antennas
– One (1) binoculars
– One (1) dessert-like diorama accessory
– Specially designed figure stand with Star Wars logo and character nameplate

—————————————–

Star Wars Episode II: Attack of the Clones C-3PO 1/6th Scale Diecast Collectible Figure

Programmed for etiquette and protocol, “Threepio”™ was built by a young Anakin Skywalker™, and has been a constant companion to astromech droid R2-D2™. In Attack of the Clones, C-3PO left with Anakin and R2-D2 for Geonosis™, where he had a bit of a misadventure — accidentally swapping heads with a battle droid. C-3PO found he was “quite beside himself” literally on the wrong side of the first battle of the Clone Wars™.

In celebrating the 20th anniversary of Star Wars: Attack of the Clones, Hot Toys is excited to officially present a series of collectibles based on this landmark film for fans!

The all-new 1/6th scale C-3PO collectible figure is skillfully crafted in diecast material featuring detailed mechanical design with amazing weathering effects, LED light-up eyes, a blaster, an interchangeable Battle Droid head, a figure base, and a special designed commemorative packaging!

This human-cyborg relations protocol droid will be an excellent addition in your collection alongside R2-D2!

Specifications
– Product Code: MMS650D46
– Product Name: C-3PO™
– Height: Approximately 29cm tall
– Points of Articulations: 26
– Special Features: Highly detailed mechanical body design with real-like wires at waist, Contains diecast material
– Product Release Date: Approximately Q2 – Q3, 2023

The 1/6th scale C-3PO™ Collectible Figure specially features:
– Authentic and detailed likeness of C-3PO in Star Wars Episode II: Attack of the Clones
– Meticulously crafted mechanical head with LED light-up function (yellow light, battery operated)
– Beautiful recreation of recycled scrap metal in bronze, reddish brown & silver applied with weathering effects
– Approximately 29cm tall
– Newly developed body with over 26 points of articulations
– Highly detailed mechanical body design with real-like wires at waist
– Contains diecast material
– Six (6) pieces of mechanical interchangeable hands including:
– One (1) pair of relaxed hands
– One (1) rifle holding right hand
– Three (3) gesture hands
– Special package design with Star Wars: Attack of the Clones 20th Anniversary logo

Weapon:
– One (1) blaster rifle

Accessories:
– One (1) interchangeable Battle Droid head
– Specially designed dessert themed figure stand with Star Wars logo and character nameplate

—————————————–

Star Wars Episode II: Attack of the Clones R2-D2 1/6th Scale Collectible Figure

A reliable and versatile astromech droid, R2-D2 has served Padmé Amidala™ and Anakin Skywalker™, showing great bravery in rescuing his masters and their friends from many perils. A skilled starship mechanic and fighter pilot’s assistant, he has an unlikely but enduring friendship with the fussy protocol droid C-3PO™.

Celebrating the 20th anniversary of Star Wars: Attack of the Clones, Hot Toys is pleased to officially introduce a series of collectibles based on this landmark film for fans!

The R2-D2 collectible figure is skillfully crafted with a diecast metal dome, a highly detailed mechanical construction body with openable panels and a retractable middle leg, weathered paint application, an array of accessories including a pair of rocket thrusters, a tether cable for recreating the scene when R2-D2 fixes C-3PO, a collection of attachable mechanical arms and tools, as well as a specially designed commemorative packaging.

Don’t miss the opportunity to pair R2-D2 with C-3PO in your amazing collection today!

Specifications
– Product Code: MMS651
– Product Name: R2-D2™
– Height: Approximately 18cm tall
– Points of Articulations: 10
– Special Features: Meticulously crafted diecast metal dome, Rocket thrusters for flight mode
– Product Release Date: Approximately Q2 – Q3, 2023

The 1/6th scale R2-D2™ Collectible Figure specially features:
– Authentic and detailed likeness of R2-D2 in Star Wars Episode II: Attack of the Clones
– Meticulously crafted diecast metal dome features 360° horizontal spin design
– Skillfully applied with realistic weathering effects
– Screen-accurate mechanical construction with 10 points of articulations
– Approximately 18cm tall
– Remote controlled LED light-up functions (8 sets of LED light up points, battery operated)
– Remote controlled sound effect function featuring 14 iconic R2-D2 sounds (battery operated)
– Special features including:
– One (1) pair of articulated terrain tread legs
– One (1) articulated and retractable center tread leg
– One (1) extending periscope
– Openable panels
– Special package design with Star Wars: Attack of the Clones 20th Anniversary logo

Accessories:
– One (1) C-3PO mechanical head with LED light-up function (yellow light, battery operated)
– One (1) pair of rocket thrusters for flight mode with two (2) real-like thruster fire effects
– Thirteen (13) pieces of arms (some equipped with magnetic function):
– One (1) tether cable
– One (1) life-form scanner
– One (1) computer terminal arm
– Two (2) lock pick arms
– One (1) repair arm
– Two (2) multi-function utility and interface arms
– One (1) pair of computer interface arms
– One (1) utility arm
– One (1) utility saw
– One (1) universal computer interface arm
– One (1) infrared remote control for R2-D2’s sound effect and LED light-up functions (battery operated)
– One (1) specially designed figure stand

CompaniesHot Toys
CharactersR2-D2C-3POClone TrooperBattle DroidClone Pilot
Scale1/6

Discuss