[behindthemask]

I picked up 1 of those Captain America jets and loved it since I took it out, the detail throughout is great, tiny rivots, tons of wings, opening cockpit and great interior cockpit detail, but I hated the cheap red plastic and the blue and white didn't agree with me, so I took it apart, sculpy filled the screw holes on the entire bottom of the ship, then sanded it down, and have been working on a couple coats of flat black, I'm going to be adding, more detail just debating to make it deadpool colors or red,black and white or xforce colors chrome and black, and then I'm debating on making it all weathered and possible battle damaged or keep it looking new. here's some progress pics so far, and let me know what paint scheme you think would look best.

[Boba Fettuccini]

I'd just leave it black and put the Deadpool logo on the wings

[Tiberius]

Quote:

Originally Posted by Boba Fettuccini

I'd just leave it black and put the Deadpool logo on the wings

A few more coats that is. :P

[Optimus Vader]

I like the Deadpool idea... with weathering.

[quinten182]

I was very excited when I read this title that you were making the pirate ship from the newer Deadpool series where he bought a pirate ship just because he had the money.

[Optimus Vader]

Quote:

Originally Posted by quinten182

I was very excited when I read this title that you were making the pirate ship from the newer Deadpool series where he bought a pirate ship just because he had the money.

..this really happened?

I think I need to go buy every Deadpool comic there is now.

[Boba Fettuccini]

It really happened. Bullseye paid him off to lay low, and he had it all converted to gold, bought and armed a tugboat and made Bob be his parrot.

[NoodleChow]

for some reason i picture deadpool sitting on top of it in mid flight, holding onto a harness attached to the ship with one hand and a boombox in the other blasting ride of the valkyries asking "how the heck am i flying this!?"

[behindthemask]

Yeh I previously had the thread called Deadpool's ship in the spaceship sence, but it didn't sound right and renamed it jet. The paint is not even close yet, all the individual pieces for the most part of a solid coat of black, I'm going to apply a 2nd to them and then I need to finish a full coat on the jet, the bottom had about 10 holes that were filled and sanded down, half the reason why I thought deadpool for this is because on the missle arms that attatch on the undercarrage on each side there's the circle with the line down the middle it's a perfect logo for it. I'm going to paint it all black with drybrush added to the wings and jets and copper details maybe with hints of green rust to certain areas, I haven't decided if I want to distress it with "bullet holes"/"lazer strikes" or just leave it as is. Then from there maybe paint a few deadpool emblems by hand, but the most of it was going to be faded/weathered red and black paint. I have tomorrow off and hope to finish it, or atleast most, will update the thread with new pics. It just takes so bloody long because each piece is double sided so paint 1 side wait, flip it paint, flip it paint and so on. I love the missles that came with it, actually shaped like missles not bugger launchers. Neways thanks for the updates, and ps no idea Deadpool had a ship... I need to start reading his comics more. I've found a 1:18 red vespa online I'd like to buy lol.

[behindthemask]

Just noticed this thread's still called ship instead of jet, damn advanced options!

[behindthemask]

here's an update on the progress so far, I've finished the coats of black and have done 99% of the drybrushing, there's a few areas I have to redo and a few spots on the bottom I haven't gotten to yet, but here's the drybrush work thush far:











After finishing the little bit of drybrushing silver is done, I'm going to touching up areas with bronze highlights and the wiring I'm going to do lime green in honor of Doop, then from there I'll be adding a red wash to the wings.And depending on how I like the outcome I may paint more layers of red to make some areas look like new paint.. enjoy

[Do Boy]

wow this looks good. Can't wait to see it done.

[behindthemask]

thanks man, yeh it's coming. I hope to finish a bit more before bed soon, by wed/thur hopefully will have the time to get it done or close to it.

[warmachine6]

nice paint apps reminds of a sheild jet or something

[behindthemask]

Quote:

Originally Posted by warmachine6

nice paint apps reminds of a sheild jet or something

Yeh that's kinda what I was going for, I loved the ship they had in the SDCC display a few years back and thought I'd pick up the cap jet for $25 and attempt my own, and although I love cap, Deadpool is just more badass, plus there's spots on the jet that actually have the deadpool symbol so that's what inspired it for me. the next few stages of paint are what wil make or break it. I had some badluck with a blowdryer through in the process... I filled all the screw holes on the bottom with sculpy and heated it then sanded, well some spots at the front semi melted and split, so I sanded the bottom 85% and left a little rough to make it look like it's been patched a few times. I'm going to make it weathered to say the least. more update to follow.

[Optimus Vader]

Quote:

Originally Posted by Boba Fettuccini

It really happened. Bullseye paid him off to lay low, and he had it all converted to gold, bought and armed a tugboat and made Bob be his parrot.

lol.. that's awesome. I think I want a DP pirate ship now.

Quote:

Originally Posted by behindthemask

here's an update on the progress so far, I've finished the coats of black and have done 99% of the drybrushing, there's a few areas I have to redo and a few spots on the bottom I haven't gotten to yet, but here's the drybrush work thush far:



After finishing the little bit of drybrushing silver is done, I'm going to touching up areas with bronze highlights and the wiring I'm going to do lime green in honor of Doop, then from there I'll be adding a red wash to the wings.And depending on how I like the outcome I may paint more layers of red to make some areas look like new paint.. enjoy

Looks great so far. I love the weathered/realistic metal look you have going on there. One question; what is "drybrushing?" I see the term thrown around a lot, but don't know what it actually means.

[behindthemask]

Quote:

Originally Posted by Optimus Vader

lol.. that's awesome. I think I want a DP pirate ship now.



Looks great so far. I love the weathered/realistic metal look you have going on there. One question; what is "drybrushing?" I see the term thrown around a lot, but don't know what it actually means.

Dry brushing is the process of painting a solid color down in this case black 2 coats, then taking a lighter color in this case silver and covering the brush with it, then you take a piece of paper towel and whipe 99% of the lighter color off only leaving a tiny coloring of it, then you apply it over the dark color, You can add a little or a lot depending on how weathered you want it, other techniques include using your finger with a little paint and smearing it all over the surface very fast which does a similiar effect or a tiny ammount of paint on paper towel and whipe it on and off, for a better explination check out jin saotomes tutorial

link here: Jin's Basic Custom Figure Painting Guide

[behindthemask]

here's an update guys and girls! Had a few hours tonight to do some more finish work on th Deadpool jet, still some more touch ups and few more details, then it's off to clearcoat and final assembly.

main shot


overview of the front wiring section, painted bright green in omage to Deadpool's buddy Doop.



sideview


added gold to the turbine casing, I'll be adding copper to the blades, just put the wings back on for people to get an idea what the finished thing will look like


wheel detail


missles assembled, not sure if I want to keep them weathered or paint them and added decal numbers..

[Tiberius]

Omg, this is really turned out amazing. Sooooooooooooooooooooooooooooooooooo awsome.

[behindthemask]

Quote:

Originally Posted by Tiberius

Omg, this is really turned out amazing. Sooooooooooooooooooooooooooooooooooo awsome.

Thanks man, appreciate it, I still have about another 2-3 hrs worth of painting, then about an hr of clearcoating, as a lot of it has to be done by hand rather then sprayed on, then deadpool will finally have some new wheels. updates will follow soon, Hoping to finish this project this week. and I'm off sat-mon so it'll happen.

[Tiberius]

Can we expect to see some DP logos on that baby?

[Do Boy]

This is getting even closer to Epic status!!!

[behindthemask]

Oh yeh for sure, the last pic of the missles below, the end of each missle housing where it attatches to the base has the deadpool belt buckle logo on it, I'm going to be painting white eyes in there and I may try to find a way to print off some decals on to some sticker paper. I will probably be taking a drill to it soon to make some of the wings look like they got peppered in a dog fight, and some more rust and a tiny display for the dash controls. It's coming 1 step at a time.

[warmachine6]

awsome work , keep it up , i forgot to ask id it 3.75 or 6 inch size model ?

[behindthemask]

Quote:

Originally Posted by warmachine6

awsome work , keep it up , i forgot to ask id it 3.75 or 6 inch size model ?

This is 3.75'' scale, it's the Captain America jet that's blue white and red for around $25.

Here's some more updated pics it's been clear coated, I still need to touch up a few paint rub issues and paint the eyes on the deadpool logo but it's almost there.