DC 3.75/4" Appreciation Thread

suprdave71 · 03-13-2018, 06:53 AM

Had to add this one of Beast Boy to show his fur details. He was an Infinite Heroes John Stewart body, feet from a Wolverine, and... I'm pretty sure the head is a Vortious custom. I had it in my custom parts drawer for a while.

mjonahb · 03-13-2018, 12:16 PM

My 3.75 DC collection......there are some great customs here....wish I was as talented...

DirkMaximus · 03-13-2018, 07:38 PM

Quote:

Originally Posted by suprdave71

Here are a few customs I've finished lately. I haven't had as much time as I'd like for the hobby, but these were a lot of fun. There's Rebirth Flash (Wally West), the Wizard Shazam (along with Black Adam and a Shazam custom I did a while back), and a modern take on Beast Boy. I'd like to set up Beast Boy with his different animal forms to look like he's "morphing" from one to the other.

Very cool.

I started a very similar Captain Marvel figure. It's so low down on my priority list that I'll probably never finish it. Nice to see yours done instead.

Tomax · 03-14-2018, 03:50 AM

^^^ kool collection

vindowviper · 03-14-2018, 11:54 AM

I just completed and sent this 1/18 scale Arkham series Batman gadget set to the 3D printer. I'll share the final results when they arrive.

Autobot_Goldbug · 03-14-2018, 10:11 PM

Quote:

Originally Posted by vindowviper

I just completed and sent this 1/18 scale Arkham series Batman gadget set to the 3D printer. I'll share the final results when they arrive.

DirkMaximus · 03-15-2018, 12:10 PM

Quote:

Originally Posted by vindowviper

I just completed and sent this 1/18 scale Arkham series Batman gadget set to the 3D printer. I'll share the final results when they arrive.

Cooool.

LordMudd · 03-15-2018, 07:25 PM

FYI, my TRU had started stocking Batman 66 in the video section.

CCC.

Super Joe · 03-16-2018, 01:23 AM

Big Lots $2.99 easter eggs with Batman. It scales closer to 4 inch versus 3.75 inch.

Super Joe · 03-16-2018, 03:03 AM

The authentic vintage Batman 66 exhibit at the Hollywood Museum is ending April 8th.

Anyone in California going to see it? Let us know. Take pictures to show Funko what other fun figures or zany accessories should be in their 3.75 action figure line. Items such as original scripts, Hollywood directors / actors chairs for Adam West, Burt Ward, and Yvonne Craig, can all make interesting accessories for Funko 3.75 figures. These pictures are from 13thDimension.com. Yet only you toy collectors have an eye for taking photos of what else need to be done in 3.75 figure form. So can anyone check out this vintage cool exhibit before April 8th?

This Hollywood Exhibit Celebrates the Groovy Batman of 1960s TV - Los Angeles Magazine

MUfan97 · 03-16-2018, 01:52 PM

Quote:

Originally Posted by Super Joe

Big Lots $2.99 easter eggs with Batman. It scales closer to 4 inch versus 3.75 inch.

Is Batman laying an egg?

Ninjinister · 03-16-2018, 02:00 PM

Quote:

Originally Posted by MUfan97

Is Batman laying an egg?

It's supposed to be Robin. Batman smells.

LordMudd · 03-16-2018, 03:25 PM

Schleich figures are also BOGO 40% at TRU, if you are looking for any animal forms for Snowbird, Wolfsbane, Beast Boy, etc...

CCC.

Kernel · 03-16-2018, 04:47 PM

Quote:

Originally Posted by Super Joe

Big Lots $2.99 easter eggs with Batman. It scales closer to 4 inch versus 3.75 inch.

Quote:

Originally Posted by MUfan97

Is Batman laying an egg?

Quote:

Originally Posted by Ninjinister

It's supposed to be Robin. Batman smells.

Holy chocolate eggs Batman!

suprdave71 · 03-17-2018, 07:04 AM

Quote:

Originally Posted by LordMudd

Schleich figures are also BOGO 40% at TRU, if you are looking for any animal forms for Snowbird, Wolfsbane, Beast Boy, etc...

CCC.

Good to know! I have a feeling I’ll be frequenting TRU quite a bit over the next months until they close. The whole thing really sucks.

Tomax · 03-17-2018, 07:14 AM

is it me or does the view stats for this thread not working? its been at 916k for awhile now. im very observant

LordMudd · 03-17-2018, 11:45 AM

Quote:

Originally Posted by suprdave71

Good to know! I have a feeling I’ll be frequenting TRU quite a bit over the next months until they close. The whole thing really sucks.

I read that all stores are supposed to be closed in April. Also, some vendors are already pulling unpaid for merchandise. I have not seen any proof of this yet.

CCC.

SpasticPlastic · 03-17-2018, 12:07 PM

The stores are to remain open until May 14th, unless they have zero stock left before then. And, yes, the vendors are pulling any stock that TRU had yet to pay for. So far the one by me has lost most of their Mattel (they still have Wonder Woman movie and some Teen Titans Go stuff), about 60% of their Funko POPS have been picked up, and Diamond Select is gone, except for a few Minimates and older GhostBusters. NECA is supposed to be gone by Wednesday next week. Again, this is any unpaid for product. Which means older stock may very well stick around until they close.

Autobot_Goldbug · 03-17-2018, 07:18 PM

It sucks. They were the only ones that carried Funko '66 Batman around me.

Quote:

Originally Posted by LordMudd

I read that all stores are supposed to be closed in April. Also, some vendors are already pulling unpaid for merchandise. I have not seen any proof of this yet.

CCC.

Wow all that will end up at Ross, TJX, Tuesday Mornings, etc etc

vindowviper · 03-26-2018, 04:56 PM

As promised:

DirkMaximus · 03-27-2018, 11:00 AM

Quote:

Originally Posted by vindowviper

As promised:

Those look great!

I hope you make more sets to sell. I customized the heck out of my Multiverse Arkham Knight Batman, but he's kinda boring without good accessories.

Here he is pretending to look at his hologram communicator:

And here he is with his comically large batarang:

vindowviper · 03-27-2018, 02:22 PM

I added the same articulation to almost all of my Multiverse figures. Last night, though, I guess the plastic had become brittle on the joints I had cast, and when I tried to pose Arkham Knight and Arkham Origins Batman for posting the above pics, they both broke, lol. Hence the use of the older figure.

Yes, I will make more, but it is pretty pricey to 3D print them, and since I don't have a vacuum chamber yet to make molds without bubbles, I may need to work out a deal with a caster for sales. If anyone wants to 3D print them, though, they can pm me.

Tomax · 03-27-2018, 04:45 PM

thats a kickass batman figure

DirkMaximus · 03-28-2018, 06:46 AM

Quote:

Originally Posted by vindowviper

I added the same articulation to almost all of my Multiverse figures. Last night, though, I guess the plastic had become brittle on the joints I had cast, and when I tried to pose Arkham Knight and Arkham Origins Batman for posting the above pics, they both broke, lol. Hence the use of the older figure.

That is a huge bummer. I only had the patience to do the mod on the one figure, I bet some of those others are pretty sweet with that articulation.

Quote:

Originally Posted by Tomax

thats a kickass batman figure

Thanks! Those Multiverse figures had some pretty great sculpts, they just suffered from a few poor articulation points and other details.

I redid the elbow joints, fixed his belt which was way oversized, remounted the head so he could look down more naturally, and then painted all the extra details.

MUfan97 · 03-31-2018, 09:06 AM

Custom Batman 66 Bat shield.

For those who can't see it: https://plus.google.com/photos/photo...37576425763442

03-13-2018, 06:53 AM	#6476
suprdave71 Superfan of Tomorrow Join Date: Jan 2017 Location: Saint Petersburg, FL Posts: 248	Had to add this one of Beast Boy to show his fur details. He was an Infinite Heroes John Stewart body, feet from a Wolverine, and... I'm pretty sure the head is a Vortious custom. I had it in my custom parts drawer for a while. Attached Thumbnails

03-13-2018, 12:16 PM	#6477
mjonahb Join Date: Jul 2016 Posts: 8	My 3.75 DC collection......there are some great customs here....wish I was as talented... Attached Thumbnails

03-14-2018, 11:54 AM	#6480
vindowviper Join Date: Dec 2011 Location: Florida Posts: 209	I just completed and sent this 1/18 scale Arkham series Batman gadget set to the 3D printer. I'll share the final results when they arrive. __________________ Link in bio!

03-16-2018, 01:52 PM	#6486
MUfan97 Toa of Fire Join Date: Aug 2015 Location: At your mom's house Posts: 1,897	Quote: Originally Posted by Super Joe Big Lots $2.99 easter eggs with Batman. It scales closer to 4 inch versus 3.75 inch. Is Batman laying an egg? __________________ I was born, I had a good time, I was vaporized by a bomb.

03-16-2018, 02:00 PM	#6487
Ninjinister Reverend Shinobi Join Date: Feb 2011 Location: Tacoma, WA Posts: 3,299	Quote: Originally Posted by MUfan97 Is Batman laying an egg? It's supposed to be Robin. Batman smells. __________________ My Want List (Updated July 17, 2018)