[Kernel]

Quote:

Originally Posted by vindowviper

Finally got around to making a Cyborg Superman with a head cast that's been rolling around my office/man cave for years. Most of the body is Omega Red, but the arm are from Ares.


Also, here's some Bruce Waynes, and a Clark Kent, surrounded by some other guys.

Where'd you get the Cyborg superman head? The collection and customs look awesome btw

[vindowviper]

Thanks. It's been several years, so I don't recall. I do have a link for a similar one, though:
https://buyamsale.ru/product/196016279137
Also, just found the same head I used on eBay:
https://www.ebay.com/itm/26576948566...mis&media=COPY

[Navaan]

Quote:

Originally Posted by vindowviper

Finally got around to making a Cyborg Superman with a head cast that's been rolling around my office/man cave for years. Most of the body is Omega Red, but the arm are from Ares.


Also, here's some Bruce Waynes, and a Clark Kent, surrounded by some other guys.

Wait, which Grodd is that

[vindowviper]

It's a customized Kong figure. I preferred the better articulation and larger size of this figure over the Spin Master one.

[Navaan]

Quote:

Originally Posted by vindowviper

It's a customized Kong figure. I preferred the better articulation and larger size of this figure over the Spin Master one.

That thing is genuinely perfect.

[JohnRedcorn]

I got quality control issue with my Bale batman from that 3 pack

Kinda bummed out... any chance these figures get released in retail instead of just Amazon?

[vindowviper]

Quote:

Originally Posted by Navaan

That thing is genuinely perfect.

Thanks!

[vindowviper]

Quote:

Originally Posted by JohnRedcorn

I got quality control issue with my Bale batman from that 3 pack

Kinda bummed out... any chance these figures get released in retail instead of just Amazon?

Not a clue. You could heat up the joint with a hair dryer or hot water and try to push it closer together. Or is this as far as it goes? If so, you would have to remove the lower leg after heating it up and carve out the excess plastic with a dremel.

[suprdave71]

Looks like there will be a 2nd wave of the F5 Arkham Knight figures, based on the Joker reveal from a Batman Day street fair in Japan this month. Who else should they put in the wave?

[vindowviper]

Quote:

Originally Posted by suprdave71

Looks like there will be a 2nd wave of the F5 Arkham Knight figures, based on the Joker reveal from a Batman Day street fair in Japan this month. Who else should they put in the wave?

The women figures would be nice first: Arkham Catwoman, Poison Ivy, Batgirl, & Harley Quinn. Then (in no particular order) Scarecrow, Riddler, Alfred, Killer Croc, Ra's al Ghul, Commissioner Gordon, Bane, Clayface, Hugo Strange, Mr. Freeze, Penguin, and Mad Hatter.

[Specter]

Quote:

Originally Posted by suprdave71

Looks like there will be a 2nd wave of the F5 Arkham Knight figures, based on the Joker reveal from a Batman Day street fair in Japan this month. Who else should they put in the wave?

Origins Suit Batman
Catwoman
Ivy
Batgirl


For anyone that hasn't gotten the 3 pack yet
Saw this on the Facebook group

So good can't wait to get mine

[vindowviper]

Finally got the Batwing in the mail today! I almost caved in (no pun intended), canceled the order and bought it through eBay. For $20, it was a steal, though. Got the Batman 3 pack a couple weeks ago. I'm impressed all around. The Batwing is the most detailed 1/18 scale version yet. It is sturdy, has retractable landing gear (wheels don't move), and the paint apps are solid. The Batman from Batman Returns fits in nicely, too.

[Autobot_Goldbug]

arg mine still hasn't shipped

[KollectorKombat]

I posted it on the Spin Master Facebook group that I saw the Extreme Sets website has all of their 1/18th Scale sets on sale! Figured I'd post it here too just in case someone was hesitant about trying these out before, now maybe a good time to grab their first one!

I really enjoy the Deranged Alley 3.0 I've got

[Kernel]

This new joker isn't bad

[Kernel]

Quote:

Originally Posted by Specter

Origins Suit Batman
Catwoman
Ivy
Batgirl


For anyone that hasn't gotten the 3 pack yet
Saw this on the Facebook group

So good can't wait to get mine

Where are you all finding the bale batman?

Quote:

Originally Posted by KollectorKombat

I posted it on the Spin Master Facebook group that I saw the Extreme Sets website has all of their 1/18th Scale sets on sale! Figured I'd post it here too just in case someone was hesitant about trying these out before, now maybe a good time to grab their first one!

I really enjoy the Deranged Alley 3.0 I've got

How much is that set?

[Autobot_Goldbug]

my Batwing finally came today

[KollectorKombat]

Quote:

Originally Posted by Kernel

Where are you all finding the bale batman?



How much is that set?

Currently 24.99, everything else available is 19.99

[vindowviper]

Quote:

Originally Posted by Autobot_Goldbug

my Batwing finally came today

Isn't it great?!

[vindowviper]

Quote:

Originally Posted by KollectorKombat

Currently 24.99, everything else available is 19.99

The Bale Batman is part of a 3 pack, which I got through Amazon, but it is currently out of stock.
https://a.co/d/gZrKOk3

[DerekSmith2003]

Both the 3-pack and batwing/figure pack were being bought up and sold for double price on amazon by some seller called REAL AUTHENTIC TOY SELLERS USA or something of the sort. Meanwhile, they both were staying listed as out of stock. After a lot of back and forth between out of stock and available for pre-order, it seems both can be ordered again and the alternate availability has been removed. I have an order in for one of each and they're showing for deliveries between today and mid-November. I won't hold my breath.

[Autobot_Goldbug]

Quote:

Originally Posted by vindowviper

Isn't it great?!

It is nice!
I got my Hiya Batman to fit in.
Mattel Multiverse Keaton Batman is too tall to fit.
I just need to fix Batman's ugly cape. I guess I could glue on a new better cape onto it.
Anyone have any tips on where to find a material similar to Multiverse's cape?
Those holes in Spin Master's capes annoy me to no end!

[Artic 66]

Quote:

Originally Posted by Autobot_Goldbug

It is nice!
I got my Hiya Batman to fit in.
Mattel Multiverse Keaton Batman is too tall to fit.
I just need to fix Batman's ugly cape. I guess I could glue on a new better cape onto it.
Anyone have any tips on where to find a material similar to Multiverse's cape?
Those holes in Spin Master's capes annoy me to no end!

I know! Spin Masters makes a pretty solid figure then ruins it with a shitty cape or something. I usually replace it with some stretchy fake leather I found at JoAnn’s. Here the only picture I have on hand of it, but it also works well to makes capes shaped like the bat wings and tuck the extra underneath when he’s standing

[sh002]

The DC Multiverse 4" 1989 Batman figure fits in the Spin Master 1989 Batwing.

[Specter]