Galactus Buster Iron Man Custom.

Do Boy · 10-14-2011, 12:29 PM

Quote:

Originally Posted by Boba Fettuccini

That particular Iron Man is on BBTS for $2!

+ 7 shipping if you don't use POL

Symbiote · 10-14-2011, 12:33 PM

Quote:

Originally Posted by FancyPants

Thanks man. I'll get to work soon. What sort of paint do you use? Just modeling paint? Thin brushes?

I typically use acrylic paints and water them down more, use multiple thin coats. Tamiya and model masters have some good metallic paints. Good luck.

Boba Fettuccini · 10-14-2011, 12:35 PM

Ah, well I do use POL. Right now it's full of clearanced IM2 comic series figures for customs.

Symbiote · 10-14-2011, 01:02 PM

Quote:

Originally Posted by Boba Fettuccini

Ah, well I do use POL. Right now it's full of clearanced IM2 comic series figures for customs.

Great place to get started. I wish they did a rescue iron woman suit. I need it to do a black widow iron suit to go with my iron avengers.

Boba Fettuccini · 10-14-2011, 01:20 PM

I want a Rescue so bad! I only read one issue about that at a bookstore while I was waiting for my sister, but it's a cool suit, and I love exo-suits and battle armor. Hopefully iM3 will get a comic series.

Jason Abbadon · 10-14-2011, 05:01 PM

Rescue's suit is all search and rescue- but she's got these magnegetic powers for moving debris that can (and has) pulled the armor right off a bad guy- in all directions!

scarecrow · 10-14-2011, 05:27 PM

Wow, that is AWESOME. I really loved the look of the Galactus Buster from MvC3 so to see it realized here is cool.

Jason Abbadon · 10-14-2011, 06:08 PM

What is the glowy chest piece from? Looks great.
A really great custom.

Symbiote · 10-14-2011, 06:12 PM

Its from star wars yoda figure. Does anyone know of a site that just sells the blast effects? That'd be awesome.

Jason Abbadon · 10-14-2011, 06:24 PM

I want to know too! I need crazy blast effects for my MY collection!

FancyPants · 10-14-2011, 06:52 PM

Quote:

Originally Posted by Symbiote

Its from star wars yoda figure. Does anyone know of a site that just sells the blast effects? That'd be awesome.

I was thinkin of heating the blast effects from iron man or somebody else and molding it while still hot to arrange that effect.

Instead of doing what you did for the head, I was going to craft the head spikes/horns or whatever from simple plastic from home depot or craft store and using a sander to get the right shape.

When the desired shape is reached, I would heat then bend to my liking. ( had that brain storm today.)

I might need some more advice on painting if it's not too much trouble.

Jason Abbadon · 10-14-2011, 10:52 PM

Use Styrene- it's the same plastic used for model kits and can be bought super cheap- buy "For Sale" sighns from any hardware store- you can layer the styrene with glue to make thicker pieces and it shapes nicely- sands great too.

teddyboy09 · 10-15-2011, 12:02 AM

Sweet lord! I want one!

FancyPants · 10-16-2011, 12:55 AM

I've decided to use the Iron man 2 advanced armor figure as my base

http://imageshack.us/photo/my-images...ncedarmor.jpg/

I think this will look great after I get done with it. Going to get all my supplies to start work tomorrow

FancyPants · 10-17-2011, 01:32 AM

I went to the hobby shop today to pick up everything I need. The place isn't open on sundays. Very disappointing. Said right on the door "closed sundays to allow employees time with their families and to worship"

Boba Fettuccini · 10-17-2011, 03:42 AM

I appreciate businesses being closed on Sundays. i absolutely hate working Sundays. Sunday has always been an iportant family day, and I am a church-goer, and working saturday night til 1 AM makes that hard...

anyway, on-topic, the advanced armor figure is great. I ordered a couple from BBTS for custom fodder. I can't wait to see how it looks with a Galactus twist on it!

Do Boy · 10-17-2011, 06:27 AM

Quote:

Originally Posted by FancyPants

I went to the hobby shop today to pick up everything I need. The place isn't open on sundays. Very disappointing. Said right on the door "closed sundays to allow employees time with their families and to worship"

Sounds like you went to Chick-fil-A lol

FancyPants · 10-17-2011, 06:43 PM

Quote:

Originally Posted by Do Boy

Sounds like you went to Chick-fil-A lol

there's one next door too

I got everything I'm going to need today. Paint, molding, etc. Im using a do it yourself stencil kit to make the head components for his helmet. The styrene they had was clear and wouldn't hold paint very well. I also got the painters tape so I can color outside the lines if my shaky hands slip. With the sales and all, it was 17.00 for the lot. I will start tonight after I get back from the gym. I'm really excited about this whole thing.

Question: Can I just take off ironmans head to perform the construction? I've seen a lot of custom jobs you guys do. I'm assuming the heads just pop off.

FancyPants · 10-18-2011, 12:30 AM

Ok, got started tonight. I can only do a little work at a time. I refuse to try to paint with my baby running around throwing shit at me.

I took a few pics and will post them in the morning

The head will be difficult

Boba Fettuccini · 10-18-2011, 01:54 AM

The head just pops off, and many of the limbs will too with a minute or two under a blowdryer. What are you using for modeling?

FancyPants · 10-18-2011, 02:02 AM

Quote:

Originally Posted by Boba Fettuccini

The head just pops off, and many of the limbs will too with a minute or two under a blowdryer. What are you using for modeling?

I got some apoxy molding for the helmet attachment and i'm using a blank stencil for the helmet blades or whatever they're called. I'll fold it over a couple times and glue it.

My paint scheme looks good so far. Only could work for about 30min but I figured out what I want to do. Really happy so far with the work.

FancyPants · 10-18-2011, 02:21 AM

Listed starting pics. I will only post more eventful progress as the days go on.

Wish me luck on my first custom guys

flipwilson · 10-18-2011, 01:54 PM

I saw one tutorial to make electric/blast effects with the plastic packaging from the toys themselves. Coated with a clear 2 part epoxy and painted with translucent paint. I wish I could find the site, but that's pretty much a long in the short of it.

D00MTR0N · 10-18-2011, 02:37 PM

dude that small galactus armor figure is wicked.

FancyPants · 10-18-2011, 02:49 PM

Quote:

Originally Posted by D00MTR0N

dude that small galactus armor figure is wicked.

It might take me a month to finish. The paint drys fast with the light bulb I use.

10-14-2011, 12:33 PM	#27
Symbiote MacGyver of MU Join Date: Nov 2010 Location: San Diego Posts: 2,364	Quote: Originally Posted by FancyPants Thanks man. I'll get to work soon. What sort of paint do you use? Just modeling paint? Thin brushes? I typically use acrylic paints and water them down more, use multiple thin coats. Tamiya and model masters have some good metallic paints. Good luck. __________________ , Showcase, BST Feedback

10-14-2011, 01:02 PM	#29
Symbiote MacGyver of MU Join Date: Nov 2010 Location: San Diego Posts: 2,364	Quote: Originally Posted by Boba Fettuccini Ah, well I do use POL. Right now it's full of clearanced IM2 comic series figures for customs. Great place to get started. I wish they did a rescue iron woman suit. I need it to do a black widow iron suit to go with my iron avengers. __________________ , Showcase, BST Feedback

10-14-2011, 06:12 PM	#34
Symbiote MacGyver of MU Join Date: Nov 2010 Location: San Diego Posts: 2,364	Its from star wars yoda figure. Does anyone know of a site that just sells the blast effects? That'd be awesome. __________________ , Showcase, BST Feedback

10-16-2011, 12:55 AM	#39
FancyPants Join Date: Oct 2011 Location: Phoenix, AZ Posts: 3,770	I've decided to use the Iron man 2 advanced armor figure as my base http://imageshack.us/photo/my-images...ncedarmor.jpg/ I think this will look great after I get done with it. Going to get all my supplies to start work tomorrow Last edited by FancyPants; 10-16-2011 at 12:57 AM.. Reason: Stupid about linking images.

10-18-2011, 02:02 AM	#46
FancyPants Join Date: Oct 2011 Location: Phoenix, AZ Posts: 3,770	Quote: Originally Posted by Boba Fettuccini The head just pops off, and many of the limbs will too with a minute or two under a blowdryer. What are you using for modeling? I got some apoxy molding for the helmet attachment and i'm using a blank stencil for the helmet blades or whatever they're called. I'll fold it over a couple times and glue it. My paint scheme looks good so far. Only could work for about 30min but I figured out what I want to do. Really happy so far with the work. Attached Thumbnails Last edited by FancyPants; 10-18-2011 at 02:12 AM..

10-15-2011, 12:02 AM	#38
teddyboy09 Someone important Join Date: Mar 2009 Posts: 29	Sweet lord! I want one!