Iron Man 2 Mark VI Power Glow Armor Review

Shin Densetsu · 03-04-2010, 05:23 PM

Not too long ago, an image of the Mark VI Power Glow Armor Iron Man turned up and instantly caught my attention:

Iron Man 2 Power Up Glow Mark VI Armor Revealed

So imagine my delight once I saw it not too long afterwards at Kmart. Since I didn't know if movie series wave 2 would be out at other retailers on March 1st, I decided to pick up movie series War Machine and later, the Mark VI power glow armor. The movie War Machine review can be seen here:

Movie War Machine From Iron Man 2 Review

I'm a fan of translucent plastic. I am also a fan of light up gimmicks that don't compromise all articulation. With my excitement increased upon finding the power glow armor at retail, how did this figure turn out? It might surprise you...read on...

Shin Densetsu · 03-04-2010, 05:28 PM

This figure doesn't come with much. Just:

figure stand
armor cards x 3

No missle launchers unlike the other armors. In lieu of the launchers and other accessories, this figure has a light up gimmick.

Shin Densetsu · 03-04-2010, 05:37 PM

The Mark VI Power Glow Armor is significantly different from the figure shown on package. The figure on the package is completely translucent whereas the final production figure only has a transparent torso. Everything else is made out of solid plastic.

I like clear/translucent plastic so I would have preferred a completely translucent figure like the one pictured on the package. It would have made the light up gimmick more impressive.

This figure is more than meets the eyes, unfortunately, as the shoulder joints are on ball joints. Sounds good right? Unfortunately no, as these joints are different than the ones on the other Iron Man figures. The shoulders fit very, very securely on the ball joints. Not bad right? Well, the disappointing thing is, the shoulders have an extremely limited range of motion. Yes the shoulders can move out to the sides, but barely. Just enough to count as sideways articulation, but not much more.

The head has great range of motion, due to the push-down feature necessary to activate the light up gimmick. The head basically functions as a button. However, the head is noticeably loose. Wobbly even.

Other than the aforementioned disappointments, the detail and sculpt on this mold is great. Be careful when picking these figures out however, because the plastic on the heads is rather soft, so there have been some that I have seen with indentations possibly from finger nails, et al.

Articulation from the lower body down is the same as on the Mark II/III/IV/V and regular Mark VI armor, so plenty poseable with the legs.

Shin Densetsu · 03-04-2010, 05:45 PM

The Mark VI Power Glow Armor is centered around the power glow gimmick. Articulation on the shoulders and torso was compromised for this one gimmick. Was it worth it? To be honest....no.

The gimmick is neat, it's the main reason I picked this figure up. An orange LED is housed within the torso and the torso is lightly painted with red, except for the arc reactor area. The arc reactor area is clear, so that the orange light shows through brighter. The light shows brighter from the front than the back.

It's fun to light this Iron Man up in the dark. This gimmick is meant to replicate SPOILERS DON'T READ THE NEXT SENTENCE IF YOU WANT TO AVOID SPOILING THE MOVIE(highlight to read):the sheer power of the Mark VI, apparently it's prone to overheating or something so energy dissipates out..or something...I don't remember I threw away the packaging.

I took some shots in the dark to show how bright it can get. For me, gimmicks are cool so long as they don't compromise articulation too badly. Unfortunately, as cool as the power glow gimmick is, it compromised too much articulation for me. I can deal with the loss of abdominal articulation, but minimal range of motion for the shoulders? That disappoints me. This could have been my favorite Mark VI figure had the shoulders not been shafted like that.

Shin Densetsu · 03-04-2010, 05:49 PM

This will be part 1 of showing how limited the articulation is on this figure. The following are poses I put the Mark VI Power Glow armor in towards the end of the photoshoot. As you can see, the leg articulation is great, but the upper body articulation suffers. This is basically, as dynamic as it's going to get.

Shin Densetsu · 03-04-2010, 06:00 PM

As you can see in the following images, the basic Mark VI smokes the Mark VI Power Glow armor in the articulation department. I predict that the basic Mark VI will be the favorite of collectors, with the Power Glow version appealing more to kids. One of the most appealing things about the Iron Man 2 line is full articulation. The articulation in this line is superior to that of the current 3-3/4" Spiderman line, and depending on who you talk to, Marvel Universe(the latter is more on the side of parity).

Simply put, if you like light up gimmicks and don't mind the loss of articulation, get the power glow Mark VI. If you are looking for consistency and high poseability, the basic Mark VI is for you.

The basic Mark VI is more appealing to me, because I get more fun out of posing it rather than trying to pose the power glow version and activating the power glow gimmick.

Shin Densetsu · 03-04-2010, 06:02 PM

In conclusion, the power glow armor is a decent purchase, but underwhelming. I won't recommend it wholeheartedly simply because it's not a must buy. Articulation is a key selling point for Hasbro's 3-3/4" Marvel lines and this figure lacks it. The basic Mark VI is simply more straightforward fun due to higher poseability, though this may differ with younger audiences.

I give it a 6/10. Decent if you know what you are getting into, but otherwise, the standard Mark VI is superior.

Enigma2K2 · 03-04-2010, 06:14 PM

... and yet, the Power Glow one has practical "repulsor blasts" hands...

Too bad you can't switch em...

nomad1632 · 03-04-2010, 07:58 PM

Quote:

Originally Posted by Enigma2K2

... and yet, the Power Glow one has practical "repulsor blasts" hands...

Too bad you can't switch em...

why cant you the hands plug in on all the others should fit easily I got the regular VI saw this one but the loss of articulation just kills it and i don't like the glow bleed in the torso

Tarquinius · 03-04-2010, 08:29 PM

Thanks Shin, I was struggling between getting this figure or not as another notch in my Ironman Hall of Armor set but I agree when you say that the articulation is too far gone.

Maybe if it ever got on sale for 4 dollars....

Autobot_Goldbug · 03-04-2010, 10:26 PM

Quote:

Originally Posted by nomad1632

why cant you the hands plug in on all the others should fit easily I got the regular VI saw this one but the loss of articulation just kills it and i don't like the glow bleed in the torso

I agree that glow bleed ruined it for me that I didn't even look at articulation.

scarecrow · 03-04-2010, 11:48 PM

Thanks again for the review, Shin. The Mark VI is a kickass armor... Can't wait to find this. Probably will buy both the light up and non.

Shin Densetsu · 03-05-2010, 12:01 AM

Quote:

Originally Posted by Tarquinius

Thanks Shin, I was struggling between getting this figure or not as another notch in my Ironman Hall of Armor set but I agree when you say that the articulation is too far gone.

Maybe if it ever got on sale for 4 dollars....

No problem man, the bad thing is, you can't tell how limited the arm articulation is until you take the figure out of package.

MonkeyBusiness · 03-05-2010, 07:11 AM

I picked up one of these last night and am in the process of modding it. Mainly, removing the dumb red LED and replacing it with a white or blue LED. Also, gonna darken up the chest so it only comes out of the Arc Reactor. And gonna try and get a pushbutton switch in there so that you can press Iron Man's head down to turn it on and off.

Anyone have any thoughts on which color LED I should use? Blue or white?

Enigma2K2 · 03-05-2010, 09:48 AM

Quote:

Originally Posted by nomad1632

why cant you the hands plug in on all the others should fit easily I got the regular VI saw this one but the loss of articulation just kills it and i don't like the glow bleed in the torso

If you can, great, but I don't want to buy this waste of plastic just for that...

Quote:

Originally Posted by MonkeyBusiness

I picked up one of these last night and am in the process of modding it. Mainly, removing the dumb red LED and replacing it with a white or blue LED. Also, gonna darken up the chest so it only comes out of the Arc Reactor. And gonna try and get a pushbutton switch in there so that you can press Iron Man's head down to turn it on and off.

Anyone have any thoughts on which color LED I should use? Blue or white?

Hey, are the hands removable/swappable with the regular Mark III/IV armor?

Haloid1177 · 03-05-2010, 10:07 AM

Quote:

Originally Posted by Enigma2K2

... and yet, the Power Glow one has practical "repulsor blasts" hands...

Too bad you can't switch em...

While I don't know about the Light-Up Mark VI, the easiest thing to do is switch one of the hands with the repulsor hand from the Mark IV.

nomad1632 · 03-05-2010, 02:13 PM

Quote:

Originally Posted by Haloid1177

While I don't know about the Light-Up Mark VI, the easiest thing to do is switch one of the hands with the repulsor hand from the Mark IV.

yeah Ive found that you can switch them but don't know about the power glow but if I had to guess its the same.

VBBN · 03-08-2010, 01:29 PM

I'll probably be getting him. The wobbly head seems to look a bit distracting though.

Shin Densetsu · 03-28-2010, 10:52 PM

Quote:

Originally Posted by MonkeyBusiness

I picked up one of these last night and am in the process of modding it. Mainly, removing the dumb red LED and replacing it with a white or blue LED. Also, gonna darken up the chest so it only comes out of the Arc Reactor. And gonna try and get a pushbutton switch in there so that you can press Iron Man's head down to turn it on and off.

Anyone have any thoughts on which color LED I should use? Blue or white?

In think white would be good.

lucafon · 03-29-2010, 10:59 AM

It looks good and will propably look great in displays espicially if they are dark
however many people don't like figures with a gimmic

Shin Densetsu · 03-29-2010, 11:31 AM

Quote:

Originally Posted by lucafon

It looks good and will propably look great in displays espicially if they are dark
however many people don't like figures with a gimmic

It will only look good displayed in the dark if you mod a switch into the body....as is you have to keep the head down to keep the figure lit up.

View Poll Results: What Do You Think Of Mark VI Power Glow Armor
10	0	0%
9	2	13.33%
8	0	0%
7	4	26.67%
6	3	20.00%
5	2	13.33%
4	0	0%
3	3	20.00%
2	0	0%
1	1	6.67%
Voters: 15. You may not vote on this poll

03-04-2010, 05:23 PM	#1
Shin Densetsu OPTIMUS GUINNESS Join Date: Oct 2008 Posts: 8,542	Not too long ago, an image of the Mark VI Power Glow Armor Iron Man turned up and instantly caught my attention: Iron Man 2 Power Up Glow Mark VI Armor Revealed So imagine my delight once I saw it not too long afterwards at Kmart. Since I didn't know if movie series wave 2 would be out at other retailers on March 1st, I decided to pick up movie series War Machine and later, the Mark VI power glow armor. The movie War Machine review can be seen here: Movie War Machine From Iron Man 2 Review I'm a fan of translucent plastic. I am also a fan of light up gimmicks that don't compromise all articulation. With my excitement increased upon finding the power glow armor at retail, how did this figure turn out? It might surprise you...read on... Attached Thumbnails __________________ The Transformers! Knowing Is Half The Battle! Thunder, Thunder, Hoooooooo!!!!! Tokusatsu all day everyday! CHECK OUT OUR RESOURCES SECTIONS HERE!: Transformers Database GI Joe Database

03-04-2010, 05:28 PM	#2
Shin Densetsu OPTIMUS GUINNESS Join Date: Oct 2008 Posts: 8,542	This figure doesn't come with much. Just: figure stand armor cards x 3 No missle launchers unlike the other armors. In lieu of the launchers and other accessories, this figure has a light up gimmick. Attached Thumbnails __________________ The Transformers! Knowing Is Half The Battle! Thunder, Thunder, Hoooooooo!!!!! Tokusatsu all day everyday! CHECK OUT OUR RESOURCES SECTIONS HERE!: Transformers Database GI Joe Database

03-04-2010, 05:37 PM	#3
Shin Densetsu OPTIMUS GUINNESS Join Date: Oct 2008 Posts: 8,542	The Mark VI Power Glow Armor is significantly different from the figure shown on package. The figure on the package is completely translucent whereas the final production figure only has a transparent torso. Everything else is made out of solid plastic. I like clear/translucent plastic so I would have preferred a completely translucent figure like the one pictured on the package. It would have made the light up gimmick more impressive. This figure is more than meets the eyes, unfortunately, as the shoulder joints are on ball joints. Sounds good right? Unfortunately no, as these joints are different than the ones on the other Iron Man figures. The shoulders fit very, very securely on the ball joints. Not bad right? Well, the disappointing thing is, the shoulders have an extremely limited range of motion. Yes the shoulders can move out to the sides, but barely. Just enough to count as sideways articulation, but not much more. The head has great range of motion, due to the push-down feature necessary to activate the light up gimmick. The head basically functions as a button. However, the head is noticeably loose. Wobbly even. Other than the aforementioned disappointments, the detail and sculpt on this mold is great. Be careful when picking these figures out however, because the plastic on the heads is rather soft, so there have been some that I have seen with indentations possibly from finger nails, et al. Articulation from the lower body down is the same as on the Mark II/III/IV/V and regular Mark VI armor, so plenty poseable with the legs. Attached Thumbnails __________________ The Transformers! Knowing Is Half The Battle! Thunder, Thunder, Hoooooooo!!!!! Tokusatsu all day everyday! CHECK OUT OUR RESOURCES SECTIONS HERE!: Transformers Database GI Joe Database

03-04-2010, 05:45 PM	#4
Shin Densetsu OPTIMUS GUINNESS Join Date: Oct 2008 Posts: 8,542	The Mark VI Power Glow Armor is centered around the power glow gimmick. Articulation on the shoulders and torso was compromised for this one gimmick. Was it worth it? To be honest....no. The gimmick is neat, it's the main reason I picked this figure up. An orange LED is housed within the torso and the torso is lightly painted with red, except for the arc reactor area. The arc reactor area is clear, so that the orange light shows through brighter. The light shows brighter from the front than the back. It's fun to light this Iron Man up in the dark. This gimmick is meant to replicate SPOILERS DON'T READ THE NEXT SENTENCE IF YOU WANT TO AVOID SPOILING THE MOVIE(highlight to read):the sheer power of the Mark VI, apparently it's prone to overheating or something so energy dissipates out..or something...I don't remember I threw away the packaging. I took some shots in the dark to show how bright it can get. For me, gimmicks are cool so long as they don't compromise articulation too badly. Unfortunately, as cool as the power glow gimmick is, it compromised too much articulation for me. I can deal with the loss of abdominal articulation, but minimal range of motion for the shoulders? That disappoints me. This could have been my favorite Mark VI figure had the shoulders not been shafted like that. Attached Thumbnails __________________ The Transformers! Knowing Is Half The Battle! Thunder, Thunder, Hoooooooo!!!!! Tokusatsu all day everyday! CHECK OUT OUR RESOURCES SECTIONS HERE!: Transformers Database GI Joe Database Last edited by Shin Densetsu; 03-04-2010 at 05:51 PM..