Iron Man 3 Marvel Legends

Mastersteef · 01-23-2013, 10:09 AM

Quote:

Originally Posted by behindthemask

I know the first horned figures was by Toybiz as I said it saves collectors paying $80 for the only other version made. And the 2 swappable heads are both different then what came with the 2 pack version from what I can tell looking at mine. The original 2pack came with A masked head and a Tony Stark head... I own them all so I know. ... I could see silver centurion being made, I really do like the Toybiz version but a redo could be nice, was never a fan of the mandarin mold, I like the blast effects and facesculpt, but the rubber wardrobe is a bitch to pose with. I liked the modular armour, but their high prices makes it hard for most ppl to pull the trigger on him, I got the warmachine variant coming in the mail moc and gonna keep him moc due to the pain it is to keep them posed same with mandarin.

I'd bet money that wave 2 of these will be "Movie" series:

- Mark 42 Armor
- Iron Patriot War Machine (or regular colors)
- Mandarin

That being said I agree with you behindthemask, We really do need a new ML Comic Mandarin figure. The MU figure of him is superb so I would be happy if they even just scaled that figure up to 6" scale, gave him a few extra points of articulation and called it good.

(he'd need his removeable helmet and energy sword too of course)

Deadp00l · 01-23-2013, 10:23 AM

They look really good will pick them up to make the Monger

Mastersteef · 01-23-2013, 10:26 AM

After seeing the detail shots of these I gotta say the helmet on "Bleeding Edge" (or Heroic Age if you prefer) looks amazing, like it came straight off the comic page.

Though I will say the arc reactor and little "arc diodes" all over his body look a little...bland. :/

Just adding a little white dot in the center of each of those would make it look pretty much perfect in my opinion.
Here's a pic of the MU version so you can see what I mean:

behindthemask · 01-23-2013, 11:19 AM

Quote:

Originally Posted by Mastersteef

After seeing the detail shots of these I gotta say the helmet on "Bleeding Edge" (or Heroic Age if you prefer) looks amazing, like it came straight off the comic page.

Though I will say the arc reactor and little "arc diodes" all over his body look a little...bland. :/

Just adding a little white dot in the center of each of those would make it look pretty much perfect in my opinion.
Here's a pic of the MU version so you can see what I mean:

Could be 1 of those figures where certain ones have better paint then others, I remember when the 1st movie figures were on shelves, but it also could be a project to make it look better with a dab of white and baby blue.

Symbiote · 01-23-2013, 11:43 AM

The head on bleeding edge armor looks better than the squished mu one. Does ml have a extremis armor? If not, its a great mold.

bmorr · 01-23-2013, 11:47 AM

is the classic armor the same that hasbro made like six years ago? In that tru two pack?

freakout117 · 01-23-2013, 03:57 PM

I compared the one with the 2-pack and the new one is that iron mans alt. head is a different one, and its lighter.

behindthemask · 01-23-2013, 04:40 PM

Quote:

Originally Posted by Symbiote

The head on bleeding edge armor looks better than the squished mu one. Does ml have a extremis armor? If not, its a great mold.

They do it was the first 1 made in the ROML figures, same as the iron patriot mold, came in regular gold/red and stealth blue, but not the same design as the MU scaled version.

freakout117 · 01-23-2013, 05:39 PM

Packaging. Looks like its a version of the ROML packaging 6" Iron Man 3 Legends Packaging Revealed - Iron Man 3 - MarvelousNews.com

TheSymbiote · 01-23-2013, 07:46 PM

We hope the Tony Stark head and alt hands from the two pack fit on this figure.

huracheeze · 01-23-2013, 10:11 PM

These are awesome. Just a newbie to collecting marvel figures, but I just picked these 3 up at my local TRU!

freakout117 · 01-23-2013, 10:12 PM

They're already out?!

huracheeze · 01-23-2013, 10:15 PM

I guess? haha. I just randomly felt like going and saw some ultimate spider-man and iron man 3 toys out. Maybe my local TRU brought these out early?

behindthemask · 01-23-2013, 10:17 PM

Quote:

Originally Posted by freakout117

They're already out?!

Some online sources have leaked and some foreign sellers have found them have not heard of anybody in the US or Canada that have found them at retail. Apparently the back card artwork shows 3 more characters but they're blacked out, with a date of Feb 16th. Which makes me think you guys will see this hit retail like next week or week after, with the 2nd wave coming out later that month/march.

freakout117 · 01-23-2013, 10:20 PM

Ah, thanks

FancyPants · 01-23-2013, 11:03 PM

Quote:

Originally Posted by huracheeze

These are awesome. Just a newbie to collecting marvel figures, but I just picked these 3 up at my local TRU!

pics or it didn't happen

and no stock ebay images.

jaybird7072 · 01-23-2013, 11:59 PM

Quote:

Originally Posted by FancyPants

pics or it didn't happen

and no stock ebay images.

I SECOND THIS...... show us the goods

warmachine6 · 01-24-2013, 05:39 AM

some new images, at marvelous news by Jay Cochran

i'm guessing the other figures will be ones from the movie IM , IP and perhaps if were lucky an mandarin although can be the IM from the avengers although 3 others will be from movie considering its both comic and movie slightly disappointing

trebleshot · 01-24-2013, 06:33 AM

Definitely looking forward to completing Iron Monger now (and the IM figures aren't too bad either, as I don't own any of those specific molds). Too bad the card backs for these are such a tease, but I understand why.

timone317 · 01-24-2013, 09:00 AM

I'm not too sure about the Iron Monger. It looks cool and all but I'm not really blown away by it. Aside from that, I'm really excited to get these figures. After scoping the package, it seems the other three figures in the line won't be coming until Fall...that seems very strange.

huracheeze · 01-24-2013, 11:00 AM

Quote:

Originally Posted by FancyPants

pics or it didn't happen

and no stock ebay images.

haha. for sure, here you go! this was at a TRU in arizona

bmorr · 01-24-2013, 11:10 AM

how much did they retail for?

jaybird7072 · 01-24-2013, 11:12 AM

very nice dude,

huracheeze · 01-24-2013, 11:21 AM

Quote:

Originally Posted by bmorr

how much did they retail for?

they were 14.99 each. paid basically 50 for all three.

danimal · 01-24-2013, 11:47 AM

I think a better, more important question is.. What's the item number for these?

01-23-2013, 10:09 AM	#26
Mastersteef Breaker of Worlds Join Date: Jul 2011 Location: Montana Posts: 1,288	Quote: Originally Posted by behindthemask I know the first horned figures was by Toybiz as I said it saves collectors paying $80 for the only other version made. And the 2 swappable heads are both different then what came with the 2 pack version from what I can tell looking at mine. The original 2pack came with A masked head and a Tony Stark head... I own them all so I know. ... I could see silver centurion being made, I really do like the Toybiz version but a redo could be nice, was never a fan of the mandarin mold, I like the blast effects and facesculpt, but the rubber wardrobe is a bitch to pose with. I liked the modular armour, but their high prices makes it hard for most ppl to pull the trigger on him, I got the warmachine variant coming in the mail moc and gonna keep him moc due to the pain it is to keep them posed same with mandarin. I'd bet money that wave 2 of these will be "Movie" series: - Mark 42 Armor - Iron Patriot War Machine (or regular colors) - Mandarin That being said I agree with you behindthemask, We really do need a new ML Comic Mandarin figure. The MU figure of him is superb so I would be happy if they even just scaled that figure up to 6" scale, gave him a few extra points of articulation and called it good. (he'd need his removeable helmet and energy sword too of course) __________________

01-23-2013, 10:23 AM	#27
Deadp00l The Merc with the Mouth Join Date: Jun 2012 Location: Under a McDonalds Posts: 34	They look really good will pick them up to make the Monger __________________ Sig pics can be no larger than 500 pixels wide, 200 pixels high and must be below 40KB. -Toyark Staff

01-23-2013, 10:26 AM	#28
Mastersteef Breaker of Worlds Join Date: Jul 2011 Location: Montana Posts: 1,288	After seeing the detail shots of these I gotta say the helmet on "Bleeding Edge" (or Heroic Age if you prefer) looks amazing, like it came straight off the comic page. Though I will say the arc reactor and little "arc diodes" all over his body look a little...bland. :/ Just adding a little white dot in the center of each of those would make it look pretty much perfect in my opinion. Here's a pic of the MU version so you can see what I mean: __________________

01-23-2013, 11:19 AM	#29
behindthemask Repulsars ready to kill Join Date: May 2010 Location: Charlottetown,P.E.I. Canada Posts: 4,825	Quote: Originally Posted by Mastersteef After seeing the detail shots of these I gotta say the helmet on "Bleeding Edge" (or Heroic Age if you prefer) looks amazing, like it came straight off the comic page. Though I will say the arc reactor and little "arc diodes" all over his body look a little...bland. :/ Just adding a little white dot in the center of each of those would make it look pretty much perfect in my opinion. Here's a pic of the MU version so you can see what I mean: Could be 1 of those figures where certain ones have better paint then others, I remember when the 1st movie figures were on shelves, but it also could be a project to make it look better with a dab of white and baby blue. __________________

01-23-2013, 11:43 AM	#30
Symbiote MacGyver of MU Join Date: Nov 2010 Location: San Diego Posts: 2,364	The head on bleeding edge armor looks better than the squished mu one. Does ml have a extremis armor? If not, its a great mold. __________________ , Showcase, BST Feedback