NECA Ultimate Pinhead

Joe Moore · 07-19-2019, 07:20 AM

SDCC 2019 - NECA Hellraiser Ultimate Pinhead Figure

Krunomo · 07-19-2019, 07:35 AM

Looks awesome. Can't wait for this guy. Would be awesome with metal pins but given the 7 inch one at SDCC has plastic ones i'm guessing they'll be plastic. At the very least i hope the plastic is sturdier than the original one as the thick warped pins on the original release are ugly. Hopefully this guy sells well and we get a NECA Hellraiser renaissance. So many Cenobites to choose from and so many that they never did the first time around. Would be awesome if they release the engineer at some point.

AlanThCollector · 07-19-2019, 08:52 AM

This looks really hood. I never owned any of the originals figures NECA made back in the day and this new Pinhead makes me glad I never did.

As an Ultimate figure though he better be priced between $20-$22 because an alternate head and two puzzle box accessories is really weak in the accessories depatment. Hopefully he comes with more than what this product description suggests.

Satam · 07-19-2019, 09:01 AM

Interchangeable heads seems like a good idea, but it's gonna be impossible to pull one off or put one on without smushing the pins.

En Sabah Nerd · 07-19-2019, 09:08 AM

Quote:

Originally Posted by Satam

Interchangeable heads seems like a good idea, but it's gonna be impossible to pull one off or put one on without smushing the pins.

I hope they've thought far ahead enough for that. From the official picture showing everything it's noteworthy that the alternate head includes the neck down to a flat cut so maybe the collar does most of the work holding the heads in place, and maybe magnets or a smooth peg on the inside keep the head from sliding.

BloodBath · 07-19-2019, 09:10 AM

pins are way too big. Ridiculous

WastelandAngel · 07-19-2019, 10:05 AM

Quote:

Originally Posted by Krunomo

Looks awesome. Can't wait for this guy. Would be awesome with metal pins but given the 7 inch one at SDCC has plastic ones i'm guessing they'll be plastic. At the very least i hope the plastic is sturdier than the original one as the thick warped pins on the original release are ugly. Hopefully this guy sells well and we get a NECA Hellraiser renaissance. So many Cenobites to choose from and so many that they never did the first time around. Would be awesome if they release the engineer at some point.

It would be really nice if they release more cenobytes as I lost all of the old ones, updated versions would just be nice anyways.

dCon · 07-19-2019, 10:52 AM

Articulation, yes?

SpasticPlastic · 07-19-2019, 11:14 AM

Quote:

Originally Posted by dCon

Articulation, yes?

Yes. If you look at some pictures posted on the sdcc thread, he is on display without the soft goods skirt, so you can see his legs. Fully articulated as any ultimate.

DRP72 · 07-23-2019, 03:13 AM

Quote:

Originally Posted by BloodBath

pins are way too big. Ridiculous

I don't really see how they could possibly make them any smaller on a figure that size.

streams · 09-28-2019, 10:08 AM

The only thing I do NOT like about this ultimate is that the lower garment looks like it is made for prom... it should be dingy, flat black with tears and stains at the lower edge imo... the originals skirt look dead on perfect as far as that goes

Joe Moore · 12-02-2019, 10:01 AM

New Photos of the Hellraiser Ultimate Pinhead Figure by NECA - The Toyark - News

Dolemite · 12-02-2019, 10:51 AM

Given NECA's track record and the complexity of the heads, I think it's safe to say that the quality control issues on this figure will be legendary...even in hell.

webz · 12-02-2019, 12:11 PM

thrilled for this. While I have zero interest in hellraiser, I love figures that I have zero interest. Means one less figure release date slot for something I want, therefore I get to pace my buying better. It's artificial self-control. lol

User897 · 12-02-2019, 12:23 PM

The pins are still too big, so NECA should take this new Pinhead to a larger scale. The face looks elongated on the closed mouth head, but oddly the clenching teeth head isn't as bad. People are going to hate the pins on this one all over again. I'll stick with my Mezco 12" version.

Comedian · 12-02-2019, 01:11 PM

Still trying to figure out how a head swap will work on him.

Joe Moore · 12-02-2019, 01:46 PM

Quote:

Originally Posted by Comedian

Still trying to figure out how a head swap will work on him.

I would say loosen up the area with some heat, then I suspect you'll need to grab the head at the ears.

firmpulse · 12-02-2019, 03:11 PM

Quote:

Originally Posted by DRP72

I don't really see how they could possibly make them any smaller on a figure that size.

They probably couldn't. But it still looks off. The numerous pins and their overall thickness destroys any negative space. Just seems like a failure in translation from actual size to 1/12 scale.

Vamp · 12-02-2019, 07:29 PM

Im getting this one.
Guys remember sometimes pictures enhance things, maybe in hand the pins dont look that big. sometimes you cant judge by a picture. i leanrned that the hard way LOL

Krunomo · 12-02-2019, 07:41 PM

Looks good. Would be hard to scale down the pins considering at 1:1 scale they're 3 to 5 mm thick max. I'd love to see a higher priced one with metal pins. Not only would it look better but the metal could get thinner without being too brittle. Even if they packaged him with a pinless head that would be awesome. Pin your own pinhead. I suppose you could try clipping off the plastic pins and replacing them with metal ones.

firmpulse · 12-03-2019, 08:25 AM

Quote:

Originally Posted by Vamp

Im getting this one.
Guys remember sometimes pictures enhance things, maybe in hand the pins dont look that big. sometimes you cant judge by a picture. i leanrned that the hard way LOL

That is very true. Good point.

Wonderful Toys · 12-03-2019, 12:53 PM

The figure looks fine to me. And you have to remember, even the Mezco Pinhead had thick pins. I don't think pins that are accurately scaled can be done on a 7" figure, period. Even with metal ones. There's a reason the Cartoon Pinhead literally has no pins at all, just bumps.

Joe Moore · 12-09-2019, 01:04 PM

Final Packaging Photos of the Hellraiser Ultimate Pinhead Figure by NECA - The Toyark - News

Tracer · 12-09-2019, 03:59 PM

Looks really good. I'll be picking it up fo sho.

I do hope they get to finish the original 4. I don't want any beyond them though.

hotheads · 12-10-2019, 01:43 AM

Quote:

Originally Posted by User897

The pins are still too big, so NECA should take this new Pinhead to a larger scale. The face looks elongated on the closed mouth head, but oddly the clenching teeth head isn't as bad. People are going to hate the pins on this one all over again. I'll stick with my Mezco 12" version.

there's a good chance they will make this in 1/4 but the ultimate scale is what it is. it's likely they are at the limit when it comes to manufacturing.

07-19-2019, 07:20 AM	#1
Joe Moore Administrator Join Date: Oct 2008 Posts: 34,319	SDCC 2019 - NECA Hellraiser Ultimate Pinhead Figure __________________

07-19-2019, 07:35 AM	#2
Krunomo Join Date: May 2017 Location: Sydney, Australia Posts: 305	Looks awesome. Can't wait for this guy. Would be awesome with metal pins but given the 7 inch one at SDCC has plastic ones i'm guessing they'll be plastic. At the very least i hope the plastic is sturdier than the original one as the thick warped pins on the original release are ugly. Hopefully this guy sells well and we get a NECA Hellraiser renaissance. So many Cenobites to choose from and so many that they never did the first time around. Would be awesome if they release the engineer at some point. Attached Thumbnails

07-19-2019, 09:08 AM	#5
En Sabah Nerd Join Date: Jan 2014 Location: Texas Posts: 9,789	Quote: Originally Posted by Satam Interchangeable heads seems like a good idea, but it's gonna be impossible to pull one off or put one on without smushing the pins. I hope they've thought far ahead enough for that. From the official picture showing everything it's noteworthy that the alternate head includes the neck down to a flat cut so maybe the collar does most of the work holding the heads in place, and maybe magnets or a smooth peg on the inside keep the head from sliding. __________________

07-19-2019, 10:05 AM	#7
WastelandAngel Join Date: Jan 2017 Location: Elmira, NY Posts: 362	Quote: Originally Posted by Krunomo Looks awesome. Can't wait for this guy. Would be awesome with metal pins but given the 7 inch one at SDCC has plastic ones i'm guessing they'll be plastic. At the very least i hope the plastic is sturdier than the original one as the thick warped pins on the original release are ugly. Hopefully this guy sells well and we get a NECA Hellraiser renaissance. So many Cenobites to choose from and so many that they never did the first time around. Would be awesome if they release the engineer at some point. It would be really nice if they release more cenobytes as I lost all of the old ones, updated versions would just be nice anyways. __________________ Collecting MOTUC, Aliens, Predator, horror.

07-19-2019, 11:14 AM	#9
SpasticPlastic Join Date: Jun 2016 Location: Minnesota Posts: 2,893	Quote: Originally Posted by dCon Articulation, yes? Yes. If you look at some pictures posted on the sdcc thread, he is on display without the soft goods skirt, so you can see his legs. Fully articulated as any ultimate. __________________ Spastic for Plastic Dead Air Disco