[jedirulz123]

Quote:

Originally Posted by samsson37

Hey guys I'm looking for a gun holster set for my viper.anybody got some or know where to get them

Depending on the holster type, Indiana Jones had one for a revolver, Han Solo had plenty.
Your best bet for Viper is Black Widow, and it just so happens that they've re-released her with the Mark 43

[deathofthelines]

Quote:

Originally Posted by Snowflakian

If they don't, the exo armors from the first avengers movie should fit it.

I know it does I have 1 but I was hoping for something new that hides the smaller fig completely. Just dreaming a little dream

[Kernel]

I saw that ultron vs iron man 3 pack at target today. I almost got one cuz the paint on my mark 42 head looks like crap, and maybe I could use the ultron zombie looking drone head sculpt, but man that ultron prime looked awful. I'm not even sure if I could use the headsculpt on a custom. It's too bad hasbro can't throw the 1/18 collectors a bone, but at least I won't be spending more money.

[deathofthelines]

Quote:

Originally Posted by Kernel

I saw that ultron vs iron man 3 pack at target today. I almost got one cuz the paint on my mark 42 head looks like crap, and maybe I could use the ultron zombie looking drone head sculpt, but man that ultron prime looked awful. I'm not even sure if I could use the headsculpt on a custom. It's too bad hasbro can't throw the 1/18 collectors a bone, but at least I won't be spending more money.

Anyone got pics of this 3 pack??

[slim19722]

Number of the casting sites have holsters from various figure lines. I started making my own from hockey tape. I just wrap paper around the gun, then wrap the tape around the paper, trim if needed, paint, then done. The tape also works well for straps/weapon slings. Electrical tape works too for that smooth, leathery look. Some use goo gone to remove the adhesive before fitting to the pistol of choice.


Alexander Pierce has been in WIP mode for awhile, that eventually I'll finish-GI Joe Matt Trakker head(which looks a lot like Reddford and head shaped like his, plus a DC Multiverse Black Mask body with added elbow swivel.

[ukmu]

here is the black widow belt

I used Punisher holsters fixed to Valkyrie belts




here is a pic of the target 3 pack @deathofthelines

and a quick video review

and this is for Jackieboy

Moss Eisley: De-Yellowing Vintage Action Figures - Full guide

^^^^^^^guide

[ukmu]

that look you get when you check TOYARK three times throughout the day in a span of over 10 hours, and still see that your post was the last one.

[jedirulz123]

Quote:

Originally Posted by ukmu

that look you get when you check TOYARK three times throughout the day in a span of over 10 hours, and still see that your post was the last one.

I too have done that all day, but I had nothing to put of any value to anyone.

I will say though, my Hood and Sin bases came today, and the Retaliation Lady Jays I'm using for an AoS Mockingbird came yesterday so I'll have pics up later.
In other news, I got my Doom problem sorted and I picked up Bishop in Sainsburys. He dwarfs my custom, and the closed fist hand can be used for his mutant power.

[K Dubious]

Quote:

Originally Posted by ukmu

that look you get when you check TOYARK three times throughout the day in a span of over 10 hours, and still see that your post was the last one.

Well the addiction is strong, I come here maybe ten time a work day. I feel like a full time lurker, lol. I do think that this thread has the most activity on TA though.

That being said let's appreciate!!!!!!





Here is my finished Dum Dum Dugan, head cast came from Vort and the hat is the business. I wish the Coulson head I recieved looked as good as this one, but oh well it will still look better than what I have on there now.

[ukmu]

My package from the awesome K-Dubious came today!!!!! Cheers for the extras! I had him cast some weapons and other stuff (and an olive green Dr. Doom- I cant help myself) and let me tell you....his casts are right there with the best of them. In fact, his are cleaner and have no slag to clean like everyone else's stuff. Got the movie Black Widow's feet cast in white so that is my Sharron Carter done (with no painting on the feet--perfect for a Maria Hill)

I have looked over all the stuff and it is QUALITY... you should set up a store! It isnt easy casting 17assult rifles for the S.H.I.E.L.D. army and look flawless...but the dub one pulled it off!

[samsson37]

Quote:

Originally Posted by K Dubious

Well the addiction is strong, I come here maybe ten time a work day. I feel like a full time lurker, lol. I do think that this thread has the most activity on TA though.

That being said let's appreciate!!!!!!





Here is my finished Dum Dum Dugan, head cast came from Vort and the hat is the business. I wish the Coulson head I recieved looked as good as this one, but oh well it will still look better than what I have on there now.

I agree with you guys about checking back thru the day lol..
K-Dub can you hear me going GGGGGGGGGGGGRRRRRRRRRR from NY
Glad you like the Duggan dude

[ukmu]

Quote:

Originally Posted by jedirulz123

I too have done that all day, but I had nothing to put of any value to anyone.

I will say though, my Hood and Sin bases came today, and the Retaliation Lady Jays I'm using for an AoS Mockingbird came yesterday so I'll have pics up later.
In other news, I got my Doom problem sorted and I picked up Bishop in Sainsburys. He dwarfs my custom, and the closed fist hand can be used for his mutant power.

Hood- Indy? Sin....I need to make her too. I have about 6 Red Skull heads lying around.

Glad you fixed Doom. Yeah, Bishop is HUGE compared to some figures. i didnt measure but he has to be pushing 5 inches! ( 10 inches if I were to tell my wife!!!)

[samsson37]

I'm soooooooo falling into a UKMU joke.....Ok, here we go ...Is Bishop bigger/Taller than the IM Hulk......*drumroll*-insert joke here.....

[ukmu]

coming soon....maybe. kickstarter JUST launched...HYDRA female COULD be a goal!!!! I would kick the Queens dogs for a shot at these!!!!



https://www.kickstarter.com/projects...8-scale-figure

[jedirulz123]

Quote:

Originally Posted by ukmu

Hood- Indy? Sin....I need to make her too. I have about 6 Red Skull heads lying around.

Glad you fixed Doom. Yeah, Bishop is HUGE compared to some figures. i didnt measure but he has to be pushing 5 inches! ( 10 inches if I were to tell my wife!!!)

Tut, dirty b*stard XD
Hood is indeed Indy, he came in a pair with Cate Blanchett from Crystal Skull who became Sin. I got the CA:TWS Red Skull to replace my TFA Skull; he had a bit of a nose which lent itself to Sin rather than her father, and the newer one looks a lot more like Hugo Weaving's portrayal.

As for Doom, I fixed him more or less, but he was the white one and I thought why the hell not and added a green one to my order from Nexodusrex. Maybe I'll have my fixed one as a broken down Doom armour in a diorama.

Speaking of Doom, has anyone thought about getting a few of the new Black Series Thorn Clone for a Latverian army, or some Doombots or something?

[ukmu]

who else needs at least 2 of of this S.H.I.E.L.D. female trooper in their life????

[K Dubious]

I like those especially the concept behind them, but why do the upper arms look so weird? It looks like, Cankles of the elbow. <--- Medical term I just created!

[ukmu]

happy soldiers if they get some ladies in the ranks!

[jedirulz123]

Quote:

Originally Posted by ukmu

who else needs at least 2 of of this S.H.I.E.L.D. female trooper in their life????

That waist joint would be nice, all my SHIELD females are on the movie Black Widow body, except Mockingbird.

[ukmu]

Quote:

Originally Posted by K Dubious

I like those especially the concept behind them, but why do the upper arms look so weird? It looks like, Cankles of the elbow. <--- Medical term I just created!

daddy likes a big elbow....cankle ows.... XD

Nah, it is where the fabric rests in the mock up sculpt.

I hope this kickstarter goes frontpage here. Could be pretty cool. I klnow it is aimed Joes and that crowd, but it is cool they are thinking of us too!

[Falcone]

I'm planning a possible stretch goal for the two mock-ups shown in this thread.

Quote:

Originally Posted by K Dubious

I like those especially the concept behind them, but why do the upper arms look so weird? It looks like, Cankles of the elbow. <--- Medical term I just created!

The arms were made to be short sleeves. I'm also looking at the possibility of slightly modifying the arms and upper body to slim it down.

[ukmu]

Welcome Falcone.....the man behind the kickstarter!!!!


he is like Beetlejuice....say his name too much and he pops up!!!! Welcome welcome welcome!

[ukmu]

I would two of the HYDRA girls as MECH drivers to start


I have several other custom Joe vehicles for HYDRA and S.H.I.E.L.D.

THAT UNIT IS ALREADY LEAD BY A FEMALE, MIGHT AS WELL HAVE FEMALE DRIVERS TOO!

[K Dubious]

Quote:

Originally Posted by Falcone

I'm planning a possible stretch goal for the two mock-ups shown in this thread.



The arms were made to be short sleeves. I'm also looking at the possibility of slightly modifying the arms and upper body to slim it down.

I meant no disrespect as I really like your ideas and concept. Plus the prototype looks so much better than the mock ups. Cool to see your post here too, I hope you are funded. Quick question is your idea behind the line to fill the gap of missing female-only figures? I think it would be awesome to get some male and female soldiers/mercenaries that aren't so G.I. Joe/Cobra branded.

[Falcone]

Quote:

Originally Posted by K Dubious

I meant no disrespect as I really like your ideas and concept. Plus the prototype looks so much better than the mock ups. Cool to see your post here too, I hope you are funded. Quick question is your idea behind the line to fill the gap of missing female-only figures? I think it would be awesome to get some male and female soldiers/mercenaries that aren't so G.I. Joe/Cobra branded.

Nothing is really off the table regarding male or female figures. The goal this project initially was to fill in for was a particular Air Force Combat Controller, but the Club killed that. So this project got reinvented a little bit.