New Marvel 3.75" Appreciation Thread

Universe · 09-22-2015, 04:38 AM

Quote:

Originally Posted by Kamatayan

Oh crap, I hope this is the Mini Ultron! And if it's 6.7" or around that it should scale well with MU stuff.

Also, here's that height chart.

I don't think it's going to be branded Revolmini; but this is definitely in scale to them. This is an easy purchase; and I really think this is the same item as we saw in the prototypes especially with the pics of the prototype being held in someone's hand (looks like it's 6"7).

Regardless; it's in scale and truly a masterpiece among action figures!

Il Cattivo · 09-22-2015, 05:27 AM

I'm glad I never bought MU ultron. that one looks perfect. definitely getting that.

jedirulz123 · 09-22-2015, 10:24 AM

Quote:

Originally Posted by kylactus

(have you ever known Hasbro to scrap a unique mold after one use?) Patience grasshopper.

Actually the Tigershark was used for Hyperion, and I believe Radioactive Man was just a regular MU body anyway.

And anyone saying 6.7" is MU scale for a Movie Ultron must also be using a Legends Hulk for that to make sense. The most in scale Hulk we have is the first movie one at 6", so Ultron should really be about 5.7" to be MU scale, based on the height chart. Nothing we've seen of it could suggest the Revolminis height anyhow.

Exodus · 09-22-2015, 11:04 AM

Quote:

Originally Posted by LapuLapu

MOC SDCC Sentinel and Galactus for $100 both is a steal , regular retail for each figure for those , I believe are $50 .

Quote:

Originally Posted by kylactus

they were 50 at the con, then they shot up to the 200 range after market, the sentinel leveled off at about 150, Galactus still gets 200 average. they have the distinction of being the largest carded figures ever produced.

Ok that's good to know yeah I remember paying 100 for 1 and probably 150 for the other but that was including shipping as well...

Quote:

Originally Posted by Kernel

Supply and demand are a huge factor too I'm guessing. I don't think they make much of some of the exclusives as some of them sell out in minutes when they are on HTS.

Yeah they make the TF exclusives a lot more it seems lately the past 2 years then the Marvel stuff. Marvel sells out real quick...

Quote:

Originally Posted by kylactus

leave it in package! they are great figures, but if you want them loose just stalk ebay for a few months you'll get loose versions for a fraction of the price. in my opinion opening a great rare collectible toy is like fooling around with a hot girl that's not great in bed, sure it's a lot of fun for a few seconds, but afterwards there's just emptiness and regret, and your left wishing you just stared at the pretty package... NOT WORTH IT!
plus your only getting two unique figures, and the way it's going there is a good chance they'll get repacked in the MI line eventually. (have you ever known Hasbro to scrap a unique mold after one use?) Patience grasshopper.

Agree, or if you can afford it get 2 of them :P

Kamatayan · 09-22-2015, 12:51 PM

Quote:

Originally Posted by jedirulz123

And anyone saying 6.7" is MU scale for a Movie Ultron must also be using a Legends Hulk for that to make sense. The most in scale Hulk we have is the first movie one at 6", so Ultron should really be about 5.7" to be MU scale, based on the height chart. Nothing we've seen of it could suggest the Revolminis height anyhow.

That's exactly what I was thinking. Hopefully the Ark messed up and that's the exact one I need xD I've heard that they tend to do that a lot.

Augustus_Cole · 09-22-2015, 01:06 PM

Quote:

Originally Posted by mutantkind

I don't see any of those emoji smiling @DarkToyLord... But nevertheless, here it is

oh...they're ALL smiley faces to me... ;o)

thanks for the pic

Madame Warlock · 09-22-2015, 07:57 PM

6.7" is way above average height for a Revoltech. Revoltechs are generally between 5 and 6 inches.

En Sabah Nerd · 09-22-2015, 08:01 PM

Quote:

Originally Posted by Madame Warlock

6.7" is way above average height for a Revoltech. Revoltechs are generally between 5 and 6 inches.

Well Ultron was a tall robot.

Madame Warlock · 09-22-2015, 08:11 PM

Quote:

Originally Posted by Kamatayan

Oh crap, I hope this is the Mini Ultron! And if it's 6.7" or around that it should scale well with MU stuff.

Also, here's that height chart.

imagine how teeny Kamala Khan is going to be if they get around to doing her

Madame Warlock · 09-22-2015, 08:12 PM

Quote:

Originally Posted by En Sabah Nerd

Well Ultron was a tall robot.

Tengen Toppa Gurren Lagann was almost the size of a galaxy and it still only got 6 inches bro

Madame Warlock · 09-22-2015, 08:16 PM

oh man what if they make a revoltech Hulkbuster

Ninjinister · 09-22-2015, 10:41 PM

Quote:

Originally Posted by Madame Warlock

Tengen Toppa Gurren Lagann was almost the size of a galaxy and it still only got 6 inches bro

Whozits whatzits. Looks like a word salad.

Quote:

Originally Posted by Madame Warlock

oh man what if they make a revoltech Hulkbuster

They'd have my money so fast. I would actually go on ramen for a month if I couldn't afford it.

En Sabah Nerd · 09-23-2015, 12:26 AM

Quote:

Originally Posted by Madame Warlock

Tengen Toppa Gurren Lagann was almost the size of a galaxy and it still only got 6 inches bro

There are also toys of Godzilla that are only an inch tall. Since the usual Revoltech is around 6" it means that Ultron should be closer to 7".

Kamatayan · 09-23-2015, 04:22 AM

What are the chances of us getting a Revolmini Ultron now that we know that we're getting a Revoltech one? I would prefer Ultron to be something like 5.7"

Ninjinister · 09-23-2015, 04:53 AM

Dagnabbit, why is it the IM3 Assemblers were so synonymous with clearance at one time that they were $3-4 everywhere but when I want one for a custom it's hard to find one for under $10?

deathofthelines · 09-23-2015, 07:58 AM

Quote:

Originally Posted by Ninjinister

Dagnabbit, why is it the IM3 Assemblers were so synonymous with clearance at one time that they were $3-4 everywhere but when I want one for a custom it's hard to find one for under $10?

Which one you looking for I'll keep an eye out

jedirulz123 · 09-23-2015, 08:13 AM

So it's been a while since UKMU last posted.

Anyone else not received their bits from him yet?

Jimmyo · 09-23-2015, 08:55 AM

Nothing here but to be fair I have no idea what he was sending, the last thing he was supposed to pop in the post was some free decals a year ago so it could be those lol.

I am sure he will come good, what's he into you for?

Psycho Pirate · 09-23-2015, 11:03 AM

Universe · 09-23-2015, 11:37 AM

Nice props; Pyscho Pirate. I love that rubber chicken; where did that come from?

Psycho Pirate · 09-23-2015, 12:53 PM

Quote:

Originally Posted by Universe

Nice props; Pyscho Pirate. I love that rubber chicken; where did that come from?

I ordered it direct from China on Taobao. I have no idea what line it is from, but I had to have it.

jedirulz123 · 09-23-2015, 02:28 PM

Quote:

Originally Posted by Jimmyo

I am sure he will come good, what's he into you for?

Well I sent him some heads to paint a while ago, they took some time to get there in the first place anyway. Then there's the white Nick Fury head to round out my Shield, and a Dr Doom cape I'm giving to Comic Loki. A couple other bits too I think, in exchange for a Scarlet Witch cape I sent him.

sh002 · 09-23-2015, 06:39 PM

X-Jet

Universe · 09-23-2015, 06:43 PM

That looks pretty cool; like how the figures can fit in the cockpit.

Autobot_Goldbug · 09-23-2015, 08:00 PM

Quote:

Originally Posted by Ninjinister

Dagnabbit, why is it the IM3 Assemblers were so synonymous with clearance at one time that they were $3-4 everywhere but when I want one for a custom it's hard to find one for under $10?

My Walmart still has quite a few for I think $7 but I'm not entirely sure because I just ignore them.

09-22-2015, 05:27 AM	#18902
Il Cattivo Angel Eyes Join Date: Dec 2013 Location: Sad Hill Cemetery Posts: 2,678	I'm glad I never bought MU ultron. that one looks perfect. definitely getting that. __________________ Count your shots - four bullets for one man, that's a waste.

09-22-2015, 10:24 AM	#18903
jedirulz123 Join Date: Aug 2013 Location: Kent, England Posts: 1,125	Quote: Originally Posted by kylactus (have you ever known Hasbro to scrap a unique mold after one use?) Patience grasshopper. Actually the Tigershark was used for Hyperion, and I believe Radioactive Man was just a regular MU body anyway. And anyone saying 6.7" is MU scale for a Movie Ultron must also be using a Legends Hulk for that to make sense. The most in scale Hulk we have is the first movie one at 6", so Ultron should really be about 5.7" to be MU scale, based on the height chart. Nothing we've seen of it could suggest the Revolminis height anyhow. __________________

09-22-2015, 12:51 PM	#18905
Kamatayan Join Date: Apr 2015 Posts: 1,562	Quote: Originally Posted by jedirulz123 And anyone saying 6.7" is MU scale for a Movie Ultron must also be using a Legends Hulk for that to make sense. The most in scale Hulk we have is the first movie one at 6", so Ultron should really be about 5.7" to be MU scale, based on the height chart. Nothing we've seen of it could suggest the Revolminis height anyhow. That's exactly what I was thinking. Hopefully the Ark messed up and that's the exact one I need xD I've heard that they tend to do that a lot. __________________ Feedback Last edited by Kamatayan; 09-22-2015 at 06:11 PM..

09-22-2015, 01:06 PM	#18906
Augustus_Cole DarkToyLord Join Date: Jul 2015 Location: It's Dark and Hell is Hot... Posts: 4,959	Quote: Originally Posted by mutantkind I don't see any of those emoji smiling @DarkToyLord... But nevertheless, here it is oh...they're ALL smiley faces to me... ;o) thanks for the pic __________________ The DarkToyLord

09-22-2015, 07:57 PM	#18907
Madame Warlock Join Date: Jul 2015 Location: Ireland Posts: 853	6.7" is way above average height for a Revoltech. Revoltechs are generally between 5 and 6 inches. __________________ Looking for: JLU Big Barda. YJ Martian Manhunter & Miss Martin. Drop me a PM!