[Thor Laserpunch]

Quote:

Originally Posted by warmachine6

how does 80th thor look? I used the long arm as the base and then medium but it started to bend, but i didn't want to risk it snapping.

I'm in process of redoing my shelves or else I'd shoot you a pic but centered him over the base disc, biggest set of jaws on the clamp like right under the torso joint from behind under the cape, and about 35-45 degree angle with just two posts. It took some messing around with to get it just right so the posts wouldn't list. I think I used the long arm on the bottom. Crap, I shoulda paid closer attention before I took everything down :sad:

[Thor Laserpunch]

Quote:

Originally Posted by Ultra Seven

Maybe they’ll be in the inevitable Stilt-Man wave. I’m sure we’ll see them and the Big Wheel/ Rocker Racer two-pack at SDCC this year.

Quote:

Originally Posted by usernamedustin

I was hoping for a Grizzly/The Grizzly 2-pack.

Good as printing money I tell ya! I'd buy 'em all. Grizz, meet Grizz...

[Harbinger]

Quote:

Originally Posted by Dr Kain

Sigh. Went to another Walmart that is about 25 minutes away and no Black Widows there either. Have they even bothered to ship her to stores?

I seen them at ocal scalper shops so they are hitting but it seems sporadic at best. I don’t go out hunting for em actively but if I stop at an epicfailmart i will look And usually its a bust.
While didn't find any of her i did find two gems at game stop. Both were on sale with Ken Masters being 22 n change and Kyo Kusanagi being 23 n change.

[Harbinger]

Quote:

Originally Posted by usernamedustin

I was hoping for a Grizzly/The Grizzly 2-pack.

Finally someone else wanting Grizzly, Id say make Girzzly the baf in a wave and give a two pack of darkstar and The Grizzly two pack.
Have the baf grizzle consist of Garrison Kaine Weapon X, hammer and his chair, gw bridge, black and gold team x wolverine, Dum Dum duggan with new shield agent helmet, Stryfe reissue, and maybe a new female shield agent with sharon carter head and maria hill head ( no commlink head piece this time )

[Boy Blunder]

Quote:

Originally Posted by Harbinger

While didn’tfind any of her i did find two gems at game stop. Both were on sale with Ken Masters being 22 n change and Kyo Kusanagi being 23 n change.

NICE! I wish the local Gamestops would carry Storm Collectibles and sell them at that cheap. I'd love to get my hands on those KoF ones.

[Harbinger]

Quote:

Originally Posted by Boy Blunder

NICE! I wish the local Gamestops would carry Storm Collectibles and sell them at that cheap. I'd love to get my hands on those KoF ones.

If I happen to run across one on my travels ill grab ya one bro. As is i would recommend hitting as many gs’s in the area as they dont show ip on the inventory tracker as to what store has what.

[Boy Blunder]

Quote:

Originally Posted by Harbinger

If I happen to run across one on my travels ill grab ya one bro. As is i would recommend hitting as many gs’s in the area as they dont show ip on the inventory tracker as to what store has what.

The closest three have never once carried anything Storm Collectibles in-store, but I haven't been since early this year. Maybe that's changed.

Thanks for keeping an eye out

[sh002]

Quote:

Originally Posted by StuartGreen2019

@sh002 - That Cyclops pose is awesome! That Fleer X-Men trading card of Cyclops from artist Marc Sasso was one of my favorites from that series.

Thanks!

Quote:

Originally Posted by warmachine6

so my go to stands are obtisu stands for my 1/12 scale figures, anyone got any other recommendations for 80th anniversary thor comic figure, i put him on the obtisu stand and he started to lean left

I prefer Bandai Tamashii stands.

[Thor Laserpunch]

Quote:

Originally Posted by Harbinger

Finally someone else wanting Grizzly, Id say make Girzzly the baf in a wave and give a two pack of darkstar and The Grizzly two pack.
Have the baf grizzle consist of Garrison Kaine Weapon X, hammer and his chair, gw bridge, black and gold team x wolverine, Dum Dum duggan with new shield agent helmet, Stryfe reissue, and maybe a new female shield agent with sharon carter head and maria hill head ( no commlink head piece this time )

I feel like we're probably getting most of them over the next year. Maybe not Dum Dum.

Kane gonna be pissed you screwed his name up.

Quote:

Originally Posted by sh002

I prefer Bandai Tamashii stands.

Can't stand the ones where the second post pegs in the middle. No bueno.

[warmachine6]

im mostly after better strength from the stand

[Thor Laserpunch]

The Act 4 Tamashii is probably the best they put out as far as sturdiness.

[Bo Ttef]

Quote:

Originally Posted by warmachine6

im mostly after better strength from the stand

Mezco One:12 can be tightened up enough to hold about anything. I have to keep Lobo on this for balance- but a couple stands stacked for height and it still hols Captain America just fine...

2020-06-18_12-46-56 by lowanbing, on Flickr

[Thor Laserpunch]

Kinda prefer your Batman Beyond with the wings to the Mezco.

[En Sabah Nerd]

Quote:

Originally Posted by Dr Kain

Sigh. Went to another Walmart that is about 25 minutes away and no Black Widows there either. Have they even bothered to ship her to stores?

It's possible that with the movie being delayed they're delaying the complete release of that one, even though it is a comic figure it's still obviously meant to be tethered to the movie's merch push. Of course the other explanation would be that this is still Walmart.

[Thor Laserpunch]

I will name him George, and I will pet him and hug him and squeeze him.

[urrutiap]

That an actual Gargoyle figure that Hasbro made for Marvel Legends or did you make that yourself? THats old school Hulk villain

[Starlord67]

Quote:

Originally Posted by Thor Laserpunch

I will name him George, and I will pet him and hug him and squeeze him.

Lol!! Too funny. I love it!

That came with Mecha-hulk I believe in the Hulk Classics line. Sorta sad looking though

[Boy Blunder]

Quote:

Originally Posted by Bo Ttef

Mezco One:12 can be tightened up enough to hold about anything. I have to keep Lobo on this for balance- but a couple stands stacked for height and it still hols Captain America just fine...

2020-06-18_12-46-56 by lowanbing, on Flickr

Is that a custom Inque? If so, nicely done!

Also, what's the source for those wings on Sam? I've been wanting to get some kind of wings for him ever since I picked up that pack.

[Thor Laserpunch]

Quote:

Originally Posted by urrutiap

That an actual Gargoyle figure that Hasbro made for Marvel Legends or did you make that yourself? THats old school Hulk villain

Yeahp, supposed to be Gremlin and he originally came with Mecha-Hulk as Starlord noted, but since they look basically the same it could be used as either I guess.

[Bo Ttef]

Quote:

Originally Posted by Thor Laserpunch

Kinda prefer your Batman Beyond with the wings to the Mezco.

I REALLY wanted to love the Mezco BB but it's probably my least favorite of the One:12's I own. But the accessories are amazing and blow the Mattel wings out of the water.

[Bo Ttef]

Quote:

Originally Posted by Boy Blunder

Is that a custom Inque? If so, nicely done!

Also, what's the source for those wings on Sam? I've been wanting to get some kind of wings for him ever since I picked up that pack.

Thanks- Yeah easy custome! ML BlackWidow and a Spiderman head with some sculpt putty to smooth it out...
Those wings came from a Falcon Titan figure. I figured for $7 it was worth a shot. They work pretty well and only needed some minor trimming

[Harbinger]

Quote:

Originally Posted by Thor Laserpunch

I will name him George, and I will pet him and hug him and squeeze him.

[Bo Ttef]

Ooo- I want a Gremlin so-bad. Wish they would do casts of him!

[Starlord67]

I painted this one as a stand in

[urrutiap]

As Im looking at the half put together Sugarman figure i have,i dunno why but if Sugarman is in any new X-Men cartoon i can see John Leguizamo doing the voice of Sugarman