Originally Posted by Captain Nash (Post 833258)

If it's a set it will likely be both.

And let me say, if we get a HC st and Selene is not in it, my angst will be so loud you'll hear it from wherever you are.

I realize she's not Dark Phoenix era HC, but she's been a solid member.

Originally Posted by Captain Nash (Post 833258)

If it's a set it will likely be both.

Originally Posted by Boy Blunder (Post 833260)

An ideal set, for me at least, would be Shaw, Pierce, Leland, Wyngarde, Frost, and Selene. With a bonus Tessa, if at all possible.

Followed by Pulse doing some army-build Hellfire Guards.

EDIT: Judging by the photos on Marvelousnews, Nimrod's head is a separate piece, even if the armor makes it look flush. The heads will likely be easy to swap, just with limited poseability.

Originally Posted by Boy Blunder (Post 833260)

An ideal set, for me at least, would be Shaw, Pierce, Leland, Wyngarde, Frost, and Selene. With a bonus Tessa, if at all possible.

Followed by Pulse doing some army-build Hellfire Guards.

Originally Posted by hasbroherofan (Post 833267)

https://i.redd.it/qfebj8hhjc051.png

Peek at the giant Sentinel from Haslab.

Originally Posted by Dr Kain (Post 833272)

Goblin's glider is now compatible with the Demogoblin glider stand AND they gave the new Spidey the same abdomen style as the Power Rangers line, so hell yeah!!!!

Only disappointment was they never talked about first appearance Storm.

Originally Posted by usernamedustin (Post 833277)

New Spidey is old news. The mold was already released as Superior Octopus.

Originally Posted by Dr Kain (Post 833215)

Hmmmmmmmmm, the AIM soldiers might be cool to get, provided they do Modok soon.

Originally Posted by Dolemite (Post 833235)

Slight issue with Iron Man 2020's effect pieces. The hand repulsor pieces are fine, but the boot jet/exhaust pieces are made of a slightly soft (not ridiculously soft, but semi-soft) plastic. I set up IM2020 on my shelf with the boot jet effect pieces so he was hovering over the other figures and the next morning he had sagged backwards and would have fallen over if Crossbones wasn't there to support him.

The pegs on the boot jet pieces were 100% intact, and the holes on IM2020's feet are fine, but when you peg the boot jet pieces in it just doesn't feel 100% tight enough - like the pegs should have been maybe 2-3% bigger - and combined with the semi-soft plastic they kinda bend and/or slip out too easily. Plus the tops of the exhaust cloud pieces that the jet pieces insert into are also semi-soft, allowing a tiny bit of forward/back bend.

This is only a minor bummer, as I'm just beyond stoked to have an 1984 Iron Man 2020 figure and I didn't really care about the effect pieces, but it DID look cool with them. Oh, well. At least there are zero QC issue with the figure itself...strong plastic, tight joints, etc.

Anyone else having these problem with IM2020's boot jet effects?

Originally Posted by usernamedustin (Post 833236)

Pretty sure the Q&A just confirmed non-SDCC Hellfire club.

Originally Posted by Dr Kain (Post 833278)

No it wasn't. This Spidey is an entirely new mold made for that Spider-Man specifically. The Superior Octopus thing did not have the lower ab crunch like teh PR line.

Originally Posted by sh002 (Post 833283)

https://dorksidetoys.com/collections/new-pre-orders

Retro Spider-Man wave, War Machine, and AOA Apocalyspe.

Originally Posted by Veronica Mars (Post 833268)

Since Walgreen's exclusives are Avengers this year, could Tigra be next after MK?

Originally Posted by Dr Kain (Post 833289)

So does anyone know if the MJ head that comes with Gwen is compatible with the MJ that was released in the 2 pack?

Originally Posted by Dodge76 (Post 833288)

I really hope so. I want her and comic Falcon so bad this year.

Originally Posted by SymbiSpidey (Post 833294)

I always thought it'd be really easy for them to do a Marvel Legends 12-inch Giant-Man that could work in both 6in and 12in displays.