Hasbro, when are the next waves going to arrive in stores? I've been waiting for Series 6 forever!!!

Most of the molds that appeared in the IM2 line are not the same as those that are in Marvel Universe, even when it's the same basic theme (Silver Centurion, for one). So right there, IM2 isn't necessarily retreading old ground. And for the most part, I think Hasbro has done a great job with the IM2 line, since most of the comic figures in that line compliment MU very well.

Also, Iron Man himself has a lot of potential with redecos. Redecos are how Hasbro pays for the R&D and manufacturing of the molds, (since redecos don't cost them nearly as much as the original release). It also helps fund the R&D for new molds (i.e. new characters), which is a good thing.

Though I agree some of Logan's costume variants could be left in the X-Men lines, it's another case of using redecos to help pay for R&D. Also, there won't be another X-Men/Wolverine movie until next year, so MU is the only home for them right now.

The current 3.75" Spider-Man line is aimed at young children (and therefore more simplistic), whereas MU is aimed for older children and to a lesser extent, adult collectors. Personally, I would prefer all of the Spider-Man figures come out in MU rather than the one they're in now.

I'm assuming you meant Marvel Universe (3.75"), not Legends (6"). If that is the case, Ms. Marvel already has 2 figures released with a 3rd on the way. Red Skull was a 2009 SDCC exclusive (sold as part of a 4-pack), but is rumored to see another release (possibly with the Captain America movie next year). Firestar was in a TRU-exclusive 3-pack with Iceman and Spider-Man. No word on regular Skrulls yet, but we are getting a lot of army-builder characters (AIM, HYDRA, S.H.I.E.L.D., The Hand), so I would say there's a good chance we might see them soon too.

If you did mean Marvel Legends, there isn't much product coming out anymore, besides 2-packs. For better or worse, Hasbro's main focus is on the 3.75" scale and using smaller sub-lines/exclusives for 6" figures.

Agreed, though some of those characters have cross-appeal with other Marvel teams and characters.

Hasbro has been asked multiple times before about Death's Head and Circuit Breaker and last I knew, they were not available due to legal issues but they were "looking into it." Both characters are owned solely by Marvel so it's Marvel's decision to make, not Hasbro's.

I would love MU versions of Circuit Breaker and Death's Head (I or II), but I just don't see this happening any time soon.

Is there a level of management across Habro's products that is responsible for trying to cross-promote the various lines? For example, if the Transformers Crossovers team is making a Ghost Rider Transformer and the MU team is making a Ghost Rider, is there anyone that sees this and says, "You TC guys try to make that transformer bike fit this MU figure"? Or someone who says, "IM2 figures are going to drive sales this year. Let's stick a small MU logo on the IM2 packaging somewhere so buyers can associate this line with the other"? Or someone to say, "If we make one figure in a business suit, the Joe team and the MU team could reuse it with different heads." Or, "The Marvel Legends fans are going nuts for product, so let's re-release YellowJacket or Fin Fang Foom or Galactus to satisfy both crowds"? Oh, wait...

As far as I'm aware, there is no such person or department. It's up to each project or division leader to think of things like that. But half the time, these toys are designed and/or manufactured at the same time. So one division may not even know what the other one is working on until a trade show or internal announcement. By that point, it's too late to do anything with the current products (but could lay the seeds for something else in the future).

Besides, making the Ghost Rider TF fit 3.75" scale would make him smaller than the rest of the Crossovers and I believe the designers are attempting to make the robot modes in-scale with one another (or at least similar in height).

I'm going to try to buy 2 GR TF's so I can have him ride himself ala Wreck-Gar and the Junkions.

With regard to the Iron Man 2 Movie and Comic figure lines there seems to be major issues with these figures reaching stores. Can this be resolved because I myself have yet to see the comic series hulkbuster, titanium man and others of that wave here in Florida. this isn't just referring to one store chain but all the major players.

Can this be figured out and resolved?

My guess as to what they'll say: "We try to send out the cases at the same time but it all depends on when said store actually puts them out,if they even order them at all"

and BTW check K-Mart

will do that one one store I didn't check today, Ill hit it up in the morning!
thanks.

Still I hope they can do something to fix this or at least better supplies for their online store

If this is true, I hope the version of Whiplash that is released for the comic series is the new version designed by Marko Djurdjevic.
http://i.annihil.us/u/prod/marvel/i/...63299_full.jpg

At the end of last year, you stated that the Daredevil mold was going to be retired. Yet we see that the Black Panther "Target Two Pack" is sporting this mold. Why is this?

All figures sporting rifles, have the same accessory (M16 with grenade launcher). Can we please see a new rifle accessory to complement other figures.

Besides the upcoming Marvel Legends 2-packs, are there any more 6 inch figures planned for the near future?

One of the biggest criticisms of the Marvel Universe line is the size in proportion to other MU figures. For example, Nightcrawler towering over his other fellow Xmen. Black Spiderman being taller then others as well. Captain America/Punisher/etc being dwarfed.

Can you explain how this decision is made and if this is something you are looking to remedy over time with the retiring and introduction of body styles?

1.Will we be seeing a mark 2 (final battle) whiplash figure?
2.Will we be seeing more HAMMER drone figures in the future?

Has this been asked yet?

Also, why was Black Spiderman body chosen for Nightcrawler instead of the more height-appropriate Bucky body?

There's always: Is MU bringing in more XMO bodies? Will MU see IM2 bodies? Will MU stick with MU established articulation (the best!)?

The Marvel Universe figures have amazing sculpts and articulation, especially extraordinary when considering the smaller scale they are in. Does the technology available to the designers dictate what characters, sculpts and paint applications they can execute or do the designer's vision push the technology for production?

I Want An Answer
Is the Marvel legends Ares wave completely extinct or could we see them again later,because i couldn't find guardian or crossbones more than 1 time?

Or Have you considered selling BAF parts individually on hasbrotoyshop for a small fee for those who couldn't get the figures? i emphasize on individually because someone might have been able to get every part except 1,so they could go to HTS for that last part

Dear Hasbro,
I've been trolling stores for months in search of wave 6 Vision and Sunfire to no avail. Since so many other figures have stuck around for months, is there any chance we'll see these in greater numbers/better availability?

Not sure if this has been asked yet but

Are we likely to see any more characters from the Ultimate universe? We have Cap but what about Iron Man or Haweye? Maybe the Liberators Colonel with Darth Maul style weapon?

I think ultimate iron man is being released in the IM2 line and the nick fury is from the ultimate universe

-Distribution of Marvel Univerese is atroucious. Fix this please?

-Who are the people behind the sculpts and planning of Hasbro's Marvel Universe figure series? I really enjoy their work on a TON of your guy's figures.

-I love what we are recieving in the lou of 2010, what will be the theme that you will introduce for 2011? Will it be more Modern? or Classic?

-Get a Nova out there before the Marvel Universe line dies. (Which I don't see happening soon.) Maybe in 2011? COME ON!

The Marvel Universe toy line is supplemented obviously by some movie counterparts (Iron man 2, Xmen Origins.) However, those line use different articulation then the MU line, which is arguably worse then the MU standard. In some recent images, we've seen some figures utilizing this the movie articulation (SDCC WW2 Cap, speculated X men giant 6 pack Wolfie and X Strike Force Wolfie).

Can you please inform us if these figures have this articulation and/or do you plan to use this articluation in the MU.

IF SO, I think I speak on behalf of the MU collector community by saying PLEASE DON'T

^ Yes! I know that using the ball-joint (movie style) articulation is a decision made by the design team but the Marvel Universe-style articulation works so much better, ESPECIALLY within the 3.75" scale.

I agree. Why do they dig the Movie Figure's grave in the way they do? IF they were to give us better articulation on the hips then maybe MORE people would purchase those characters and include them in their "universe".

in a way i like the IM2 hip joint better because they're not removable,i think they should use those joints in MU if they're gonna continue to use the Flarking Black Spider man body. and IMO that articulation seemed to work better on the IM2 line then it did for the XMO line.






I Flarking hate that black spidey body:mad:LOL

Any chance we'll see an MU wave dedicated to the more memorable recent story lines? I.e. Planet Hulk - Hulk; Siege - Sentry & Ares; Old Man Logan - Logan & Hawkeye; Secret Invasion - Skrulls in Hero disguise...