[weed619]

is this where i should have posted this instead of the "look at what ive passed on thread"







passed this up at toys r us in san diego

[BigHanksCustoms]

Quote:

Originally Posted by weed619

is this where i should have posted this instead of the "look at what ive passed on thread"

I just learned something about the SDCC carrier, not sure if it's common knowledge.

The SDCC carrier gets it's extra length via a center section installed between the standard carrier's two sections.

Essentially SDCC carrier is comprised of:

Section A (front) 2 feet long +/-
Section B (middle) 1 foot long +/-
Section C (rear) 1 foot long +/-

While the mass retail carrier is comprised of:

Section A (front)
Section C (rear)

So I'm thinking if I bought 2 SDCC carriers I could make a Mega carrier and still have a mass release carrier as well:

Mega carrier: A + B + B + C (5 feet long +/-)
Standard carrier: A + C (3 feet long +/-)

Hmmmmmmmmm........

[trekking95]

That's a lot of bucks for 2 SDCC helicarriers but that would be cool! If you ever make a long one let us know!

[solidwii]

That's essentially Hasbro's reply during the Marvel toys panel regarding the playsets for MU.

[Starscream99]

Awesome!

[Nexodusrex]

This is news?
Its been sitting at ToysRUs for the last 2 weeks in Dayton Ohio. lol.

[Lody666]

Saw it yesterday and mentioned it before this was posted

Where is my news credit?

[Joe Moore]

Quote:

Originally Posted by Lody666

Saw it yesterday and mentioned it before this was posted

Where is my news credit?

weed619 not only posted in the correct forum, but provided pictorial proof of his find. Burying a comment with no proof in another thread does not warrant being credited for news. Sorry.

[Lody666]

Sure it does

It's worth partial credit

[Joe Moore]

Quote:

Originally Posted by Lody666

Sure it does

It's worth partial credit

Posting pictorial proof of a new finding in the correct forum will result being credited for news. Posting a passing statement in a non-news thread with no proof to back up the claim will not.

[Lody666]

Quote:

Originally Posted by Joe Moore

Posting pictorial proof of a new finding in the correct forum will result being credited for news. Posting a passing statement in a non-news thread with no proof to back up the claim will not.

Dude,

I'm kidding

Sheesh

[Nexodusrex]

I have a feeling this one will go to clearance. Unless you are trying to complete the entire avengers toy line, most collectors will go after the superior SDCC version. I'll get one of these when clearance hits, and then break it for a custom battle damaged minicarrier. Can we say....Sodering Gun?

[Nexodusrex]

Quote:

Originally Posted by Lody666

Dude,

I'm kidding

Sheesh

dont worry about it man, half of the Mods are sour pusses

[trekking95]

Quote:

Originally Posted by BigHanksCustoms

I just learned something about the SDCC carrier, not sure if it's common knowledge.

The SDCC carrier gets it's extra length via a center section installed between the standard carrier's two sections.

Essentially SDCC carrier is comprised of:

Section A (front) 2 feet long +/-
Section B (middle) 1 foot long +/-
Section C (rear) 1 foot long +/-

While the mass retail carrier is comprised of:

Section A (front)
Section C (rear)

So I'm thinking if I bought 2 SDCC carriers I could make a Mega carrier and still have a mass release carrier as well:

Mega carrier: A + B + B + C (5 feet long +/-)
Standard carrier: A + C (3 feet long +/-)

Hmmmmmmmmm........

This might work and be cheaper: Take 2 standard carriers, keep the front and back half from one, take the other and cut all the front and side detail stuff off so its just a long deck, then use it like the SDCC center piece and glue it in between the regular front and back. The results would be a helicarrier bigger than any combination of the other pieces. What do you think?

[BigHanksCustoms]

Quote:

Originally Posted by trekking95

This might work and be cheaper: Take 2 standard carriers, keep the front and back half from one, take the other and cut all the front and side detail stuff off so its just a long deck, then use it like the SDCC center piece and glue it in between the regular front and back. The results would be a helicarrier bigger than any combination of the other pieces. What do you think?

Definitely be bigger. I do like the snap in/snap off aspect of the SDCC midsection. I was thinking I could sell off the SDCC "shorty" to offset some costs.

But you are onto my original thought, before the SDCC Helicarrier was announced which was buy 4 reg carriers and splice them into one big mofo of a surfboard. I want a cool display for MegaBloks, Handful of heroes, and Heroics. Can't think of a better way, than to turn the display "shelf" into a functional diorama!

I'm waiting for the china sellers to start selling off the midsections on Ebay lol.

[trekking95]

Quote:

Originally Posted by BigHanksCustoms

Definitely be bigger. I do like the snap in/snap off aspect of the SDCC midsection. I was thinking I could sell off the SDCC "shorty" to offset some costs.

But you are onto my original thought, before the SDCC Helicarrier was announced which was buy 4 reg carriers and splice them into one big mofo of a surfboard. I want a cool display for MegaBloks, Handful of heroes, and Heroics. Can't think of a better way, than to turn the display "shelf" into a functional diorama!

I'm waiting for the china sellers to start selling off the midsections on Ebay lol.

Well since most people didn't get to SDCC or get the HTS sale it would be the only way.
Or maybe the Chinese sellers will get the whole SDCC version for cheap...

[martian410]

Quote:

Originally Posted by BigHanksCustoms

I just learned something about the SDCC carrier, not sure if it's common knowledge.

The SDCC carrier gets it's extra length via a center section installed between the standard carrier's two sections.

Essentially SDCC carrier is comprised of:

Section A (front) 2 feet long +/-
Section B (middle) 1 foot long +/-
Section C (rear) 1 foot long +/-

While the mass retail carrier is comprised of:

Section A (front)
Section C (rear)

So I'm thinking if I bought 2 SDCC carriers I could make a Mega carrier and still have a mass release carrier as well:

Mega carrier: A + B + B + C (5 feet long +/-)
Standard carrier: A + C (3 feet long +/-)

Hmmmmmmmmm........

very keen observation Bighank.... I'm actually tempted to create this Mega carrier now..

[trekking95]

Wow, 2 of them! Can't wait to see how that looks!
If you don't mind me asking, how did you get 2 of them? Wasn't it a 1 per person thing?

[BigHanksCustoms]

Quote:

Originally Posted by martian410

very keen observation Bighank.... I'm actually tempted to create this Mega carrier now..

Do eeet! Do eeeeet naaaooow!

Seriously, if you're gonna open them both I'd love to see if my theory is right on!

[Iceman]

Making a stretch helicarrier and a normal one was the idea I had but they were too big to bring back home. Been waiting for pictures of someone doing it so I can at least see how it would have looked.

Quote:

Originally Posted by trekking95

Wow, 2 of them! Can't wait to see how that looks!
If you don't mind me asking, how did you get 2 of them? Wasn't it a 1 per person thing?

All they did was stamp the back of your badge and check your ID so if you had single day badges it would have been easy enough to get more the next day as your badge was clean. You could also get the guy in line behind you to buy one if he wasn't going to.

[Exodus]

Huh I saw this last week thought it was news already...

[martian410]

Quote:

Originally Posted by trekking95

Wow, 2 of them! Can't wait to see how that looks!
If you don't mind me asking, how did you get 2 of them? Wasn't it a 1 per person thing?

Truly tempting idea...The other one actually belongs to my bro, who unfortunately is a MOC collector and never plans to open the thing... Yes, one per person at sdcc, but I could barely fit these boxes in my car!

[Shin Densetsu]

Interesting, I want to see 4 carrier combined

[behindthemask]

I say buy buy 1 regular version, some thing mdf board trace the shape cut it out, extend the top and reinforce the bottom, then get 2 hidden hinges that can be mounted on the bottom and each side can rise and lower independantly. You see these a lot in fancy tables where extensions fold in and out or the table-tray raises and lowers. Ikea or a hardware/ cabinet place may carry them, just an idea, $80 for 1 regular carrier, $25 wood, and $25 hinges, the rest is paint, sanding, etc minimal costs, versus, 2 $110 sdcc versions plus shipping plus a regular one lol. Either way you make it, just take lots of pics lol. your ghostrider looks amazing!

[trekking95]

So that's a good idea making a top with MDF (it would be hard to get all the detail) but why would you want it to fold out?