[behindthemask]

it can. your better off finding wooden dowels slightly smaller then the peg hols in the feet as to a perfect tight fit, your better off buying metal rods, most hardware/building centres sell them for couple bucks for a 2-3' long piece, and they can easily be cut to size using a hacksaw, or jigsaw/bandsaw with metal blade. they will look better, less likely hood of the peg breaking off inside then having to try and extract it, which can happen! also if you add a piece of tape onto the drill bit just above the depth u want to drill it will help prevent drilling through your shelf all together. all u need is 2 half inch chunks per figure half that is in the shelf and the other is exposed.