[Tomax]

Quote:

Originally Posted by jwyss234

I actually used a few different types of stands. One thing to remember is that no stand is invisible, even the clear ones.

The main type of stand that I use is Kaiser Doll Stand for 6.5" to 11" figures. They're metal, they have a good base for the figure to stand on, and they'll last forever. You won't get a lot of dynamic poses with these stands but the 6.5" to 11" size gives you some wiggle room within the clasp. These are especially good if you have some harder to find figures (or Neca figures) as they will securely keep your figures standing upright instead of falling off a shelf. The 6" to 7" size stands work really well for female Legends and female Black Series figures but you'll need to adjust the support arm since they weren't fully bent at a 90 degree angle.

I'm used one here with Dock Ock. Spiderman wasn't even centered over the stand and it didn't have any problems supporting the two figures
[/url]

If you want the clear stands with the multi-jointed arm, then you'll need to look around on eBay. Bandai used to sell some but they appear to be discontinued. Also, all Mafex figures come with one of these stands. You could also try the Neca Dynamic AF Stands. They don't have as many joints in the arm, but they are easy to get and the arm looks to be well supported near the base.

thanks

Quote:

Originally Posted by TransFan84

IDS figure stands by Marauder Inc. Works for 3-3/4 inch figures as well as most NECA and Marvel Legends figures. Feature interlocking bases and two different peg sizes. Black or clear. I got a hundred-pack for $56.

thanks