[Trivial Psychic]

Quote:

Originally Posted by tierneygreen

Clever use of the Maria Hill head for a comms specialist.

I definitely felt that she needed the ear piece in order to better fit in with her field of operation. Even better, was that the Maria Hill head can very easily wear the Vala helmet without any sort of mod being done to it.

Quote:

Originally Posted by Cyclopswc

Nice Jill Morelli, look at those ABS! Whree did that abs come from?

Quote:

Originally Posted by usernamedustin

I'm not a doctor or plastic surgeon, but those abs have to be from Zarana.

Those abs do indeed come from Zarana. My first Zarana had arms that were constantly falling off at the bicep swivel, so I grabbed another one and chopped up the original for parts.

Quote:

Originally Posted by tierneygreen

Since we're on the subject of kitbashing, I've boiled and popped many a Legends figure, but I haven't gone further than head swaps for Classifieds. Any "gotchas" I should be aware of?

Classified figures can actually be completely disassembled without the need to dremel and crack torsos if you use plenty of hot water and a little bit of patience when pulling them apart. The most difficult parts to remove will be the arms from the shoulder, but again, if you use enough heat, and tug gently at the ball joint, they will pop right off.

I don't recommend using a hair dryer as the dryer can actually cause certain parts to shrink or melt (such as the web gear and crotch overlays.)

If you have extra figures lying around, don't be afraid to chop em up! There is also a pretty healthy aftermarket of fodder parts on Ebay that are fairly affordable. It's pretty easy with this line since many of the parts are universal, and you can make some fun placeholders (such as this Night Creeper I made) until we get proper versions.