[Th0r4z1n3]

Got some good advice on HissTank, and thought I'd share it over here. I did a Google search on how to do this before I posted and didn't come up with anything, so I hope this is able to help someone else out in the future.

I'm not sure what size drill bit I used, because I snagged it from work, but I just used a Cobra BAT that I had in my bookbag (yea, I'm that dork) to check for a tight fit against the non-grooved side of the drill bit.

Got home from work, debated about trying it a bit, then decided "eff it", and gave it a shot. I found a good spot on the foot that would leave enough plastic around the peg so as not to crack when I put it on the stand, and used my fingers to twist the drill bit into the foot. Even though it's on the underside of the foot, I was a bit worried about them looking "sloppy", but they turned out very nicely. If it wasn't for the slight difference in color, they almost look like they came from the factory this way.

A BIG thanks to arch2b on HissTank for the idea of twisting it by hand, I most definitely would have used a drill, and probably drilled all the way through the foot.

Here's some pics









...now I've gotta order some more stands from SmallJoes LOL