[80sforged]

PO'd both. Hope they do more. I still have a lot of the monsters actually.
In terms of the buck used for Warduke, it has some similarities to the Rambo one. Which for me is a Goldilocks spot, buff, but lean. Though the Rambo one did not have exposed pin holes on the shoulders. Hope that is not on the production version.

[Jester]

Quote:

Originally Posted by deecee4

Hes an evil warrior archetype so its not too much of a stretch for him to be on a classics buck. I dont think anyone would think this looks off or ridiculous. But since this is Neca anyway, wouldve preferred it on the Defenders of the Earth buck.

All credit to the original customizer for the amount of work that went into that, but the proportions look very "off" to me when compared to Tim Truman's original concept art for the character (which would be re-used for the figure's card artwork and serve as the template for most depictions of the character back in the day). Not only does Truman's Warduke have a much more streamlined musculature (in keeping with the general aesthetic of the AD&D line, which tended to exhibit a certain sleekness that hearkens back at points to the impossibly form-fitting armour of knights errant in Pre-Raphaelite paintings, far more so than the chunkiness that defines more recent fantasy lines like Mythic Legions), he also has a comparatively large head/helmet, to the point where the combination actually dominates his silhouette to some degree.

Quote:

Originally Posted by deecee4

Anyway, not a dealbreaker for me. I'm glad they're doing this.

Cheers.

Quote:

Originally Posted by 80sforged

PO'd both. Hope they do more. I still have a lot of the monsters actually.
In terms of the buck used for Warduke, it has some similarities to the Rambo one. Which for me is a Goldilocks spot, buff, but lean. Though the Rambo one did not have exposed pin holes on the shoulders. Hope that is not on the production version.

That really does look like Rambo's torso, albeit with new arms incorporating a bicep swivel.

[BB Shockwave]

Neca? Weird... After Hasbro did the Drizzt figure, I assumed it was a "tasting the water" for a proper D&D toyline from Hasbro.
These look nice, but the characters mean nothing to me. I know Warduke was in maybe one episode of that dumb cartoon, and... I am going to hazard a guess that based on all the snake motif, Grimsword is some really devout Yuan-Ti under that armor who really wants to make it clear he likes snakes?

The whole 1E "character roster" team is getting miniatures from Wizkids, btw. Ringlerun, Elkhorn, Molliver, Mercion and Strongheart in the good guys set (Valor's Call), Warduke, Kelek, Skylla, Zarak, Zargash in the League of Malevolence.
https://wizkids.com/dd-icons-of-the-...he-witchlight/

Quote:

Originally Posted by Harbinger

Oh man oh man…..i had these as a kid and look forwards to them. And Drizzt is forgotten realms and i believe these guys are greyhawk ( the normal realm in dnd ) so hasbro may have the rights to forgotten realms guys and neca might have greyhawk, dragonlance and ravensloft.

That's like, totally not likely, given that Hasbro OWNS WotC, hence any D&D setting too, apart from perhaps Dragonlance that is co-owned by the novel authors.
I am betting once the movie comes out next year, we will have a proper Hasbro toyline. I was very happy with Drizzt and especially with Guwenhwyar, I never seen such a well articulated panther toy before. I hope they make a Displacer Beast too!

[CelticMutt]

Quote:

Originally Posted by OriginalFire

Hasbro owns D&D. So would they not own the whole thing? I don't know anything about D&D but I did look it up a few days ago. Perhaps, Wikipedia is wrong.

Hasbro owns Wizards of the Coast, who have owned D&D since 1997. That would include anything made by TSR (the original owners/creators of D&D), so, yes. Forgotten Realms, Dragonlance, Greyhawk, Ravenloft, Dark Suns, Spelljammer, Mystara, Planescape, Birthright, Al-Qadim (which is technically still Forgotten Realms) ... I'm sure I'm missing a few. But all are owned by WotC, so owned by Hasbro by proxy.

As to why NECA is doing this ... Hasbro licenses out Transformers to other toy and figure makers all the time (as long as they don't transform), so this could be a similar deal.

[mangkanorxxv]

I hope the line does well so we can get TIAMAT!!!

[80sforged]

Quote:

Originally Posted by mangkanorxxv

I hope the line does well so we can get TIAMAT!!!

That sounds like a tall order, can easily seeing that for 120+. Though again, Nightmare, would be great. An experiment for a higher price point, maybe the Hook Horror, or Dragonne.

[TheBlueMarvel]

Quote:

Originally Posted by 80sforged

That sounds like a tall order, can easily seeing that for 120+. Though again, Nightmare, would be great. An experiment for a higher price point, maybe the Hook Horror, or Dragonne.

I was thinking the same about Tiamat, but while I'd love a Hook Horror - an affinity that made me nab MotUC's Shadow Beast due to it being slightly reminiscent - I think that might also be a stretch.

Truthfully, I'd settle for a Titan, Northlord, or Ogre King.

[deecee4]

Quote:

Originally Posted by 80sforged

That sounds like a tall order, can easily seeing that for 120+. Though again, Nightmare, would be great. An experiment for a higher price point, maybe the Hook Horror, or Dragonne.

Emphasis on the + cause i dont see a Tiamat in that scale being anywhere close to 120 lol.

[80sforged]

Quote:

Originally Posted by deecee4

Emphasis on the + cause i dont see a Tiamat in that scale being anywhere close to 120 lol.

Depending how they would 'actually' scale, can easily see Tiamat done at an improper smaller scale. The other issue would be articulation, if it is a solid base body with say three joints to each head... With an articualted body and decent size, I can easily see a price point of 200 given todays prices. The only things I have near that scale by NECA are the 18" Pacific Rim Jaegers and Kaiju.

[Smasher]

I'm really surprised that these are from NECA and not Hasbro as well.

Quote:

Originally Posted by 80sforged

So in for Warduke. Would love to see the rest of the old D&D line done. Also HE NEEDS NIGHTMARE!

I kind of wish these were in the original scale so we could get Nightmare
and maybe Bronze Dragon.

Quote:

Originally Posted by 80sforged

Also in regards to Drizzt. That was supposed to be based on his appearance in D&D Dark Alliance. The NECA license can be considered separate. Also I think Drizzt did not do that well, though I bought him, as he is still available on Pulse.
https://hasbropulse.com/products/dun...ulse-exclusive

Thanks. I didn't realize he was still available.

Quote:

Originally Posted by OriginalFire

So are these based on the 80s toys?

Yes.
It was a cool toy line.
I didn't have them all, but I had the primary players.
Check this out.

Quote:

Originally Posted by webz

These looks pretty cool! Never had anything D&D related as a child, since my father was convinced it was a gateway portal to satanism. He once caught me looking at a AD&D sourcebook at B. Daltons and he about exploded like I was looking at hardcore pornography!

Ah, the good ol’ days…

Nothing like growing up in the 80s being scared of Nuclear War with Russia while also being right in the middle of the Satanic Panic.

[Joe Moore]

Dungeons and Dragons -€“ Updated Photos of Warduke and Grimsword by NECA - The Toyark - News

[deecee4]

Yeah, looking at these new pics, I have to say not being on the DOTE buck isn't an issue at all for Warduke...these look amazing My only issue now is do I display them on my 80s shelf or with the few Mythic Legions I have.

[Zeorn]

I have no connection to these characters but I will probably pick these up to go with Mythic Legions and Mezco Conan when he comes in.

[80sforged]

Quote:

Originally Posted by Zeorn

I have no connection to these characters but I will probably pick these up to go with Mythic Legions and Mezco Conan when he comes in.

He was already kind of done for Mythic Legions. Colliseum Raygorr was a 'homage' to Warduke.

[JerpJerp]

That Warduke has really grown on me, I might be getting that.

[deecee4]

Looks like the back of the retro cards reveals the next two 7 inch figures.

[CosmicCreature]

Awesome Nice catch ! Thats good news Ill buy A Zarak figure for sure . Strongheart is great addition to see also even though I lean toward monsters and villains .Im just happy D&D characters are given a chance to be made into modern figures and enjoyed.

[80sforged]

new PO's up for Zarak and Strongheart
https://www.bigbadtoystore.com/Produ...ils/237494?o=8
https://www.bigbadtoystore.com/Produ...ils/237491?o=8

[Krydion]

Love how NECA is doing this line.
Would love to see a Tiamat somewhere. I would imagine there would be lots of eager buyers out there.
And yes, I'm one of those who had the LJN Tiamat back in the day and have no idea how it was lost to history along with my Shogun Godzilla, Crossbows and Catapults, and countless other vintage toys I wish I still had.......

[Zigerlion]

Strong heart looks great, but I'd like to have the whole OG cast of Dragonlance. One can dream...

[Jester]

Quote:

Originally Posted by Zigerlion

Strong heart looks great, but I'd like to have the whole OG cast of Dragonlance. One can dream...

I just hope that the wings on Strongheart's helmet aren't as sharp, stiff and fragile as the ones on Warduke's...

[ghostbogey]

Will give...
them a Look..

Cause....
It's "NECA" ;^)

[Sender]

Love this line along with Hasbro's D&D Animated Series figures!
Looking forward to more...

[firmpulse]

Oh man I love this line.

I really wish NECA would do characters from the Saturday morning cartoon also. At the very least Venger. I'm not a fan of Hasbro's poorly executed effort.

[Dolemite]

Anyone else have issues with Grimsword having slightly floppy ankles that eventually result in him dipping backwards/forwards?

BTW, Warduke is a fucking fantastic figure. Astonishingly good. Firm ankles, too!