[MastrBlastr]

Quote:

Originally Posted by cjflan32

That Cantina is a nice distraction from the new "Star Wars" show on D+.

Oh, and Hasbro labeled their "Pride" collection as "Rainbow" shirts and buried it under a bunch of Joe announcements and the aforementioned Haslab. Glad that's all working out for them.

Rainbows make me scurred, Ma.

[firmpulse]

Quote:

Originally Posted by toymaru

3D print the cantina set dudes

Quote:

Originally Posted by JPL

Do it.

Let us know how much you spend just in filament.

This guy did...And after all is said and done it's about as expensive as the H-Lab.

https://www.ebay.com/itm/40418402074...AAAOSwo7Zklw2C

The MosLab feels a little cheap to me due to all the hollow areas. They really should create gap filler panels for the final version.

[Cyclopswc]

Quote:

Originally Posted by toymaru

3D print the cantina set dudes

Quote:

Originally Posted by JPL

Do it.

Let us know how much you spend just in filament.

Quote:

Originally Posted by firmpulse

This guy did...And after all is said and done it's about as expensive as the H-Lab.

Not to mention:

The support: Not just the filament, you have to add the cost of the support too.

The 3D Model: I admire the talented people who spent hours and hours building 3D models on the computer so that they can print it. Sure, there are a lot of models on sites like Thingiverse that are free, but quality varies.

The time: how long would it take to print the whole cantina? We're talking weeks probably (depending on your 3D printer).

The paint: You have to paint it after you print it, and not everyone's as talented a painter. Add the cost and time of paint too.

The quality: I'm sad to say this, 3D printed items often looks like 3D printed items. The layers build lines are still there. The curves still have "steps". (look at the eBay link above) The quality is just not there when compared to a molded item.

3D printed items are great for items that no one else makes, but if Hasbro is making an official one, I much rather have the real thing.

[LeiaOrgana]

I kind of feel like people want others to not get into 3D printing by making it sound a lot more difficult and costly than it is. Not even here, I just see it constantly when it's mentioned elsewhere. It feels like weird gatekeeping, haha.

When comparing the price to the HasLab, it may end up costing about the same - but then you have a freakin' 3D printer forever, LOL.

I totally get how it's just easier to buy it - and more power to folks who want it. But this one in particular is getting the "print my own" reaction because size-wise, nothing here is that large so basically any 3D printer can do it with ease. It has very little paint application (don't see much at all). It pretty much looks like it *was* 3D printed.

It's also insanely easy and cheap to get Star Wars designs. Besides free ones, there are people like Landspeeder Luke who have small Patreon fees which let you access their whole library.

Yes, there is a small learning curve - but most of the newer ones have so many convenience features that it's just a matter of watching a few YouTube videos, even to replace parts, these days.

Again, I totally get why it wouldn't be worth it for some folks - but just in general, what you can 3D print is truly rivaling what they are offering and this is a great example of that.

[Harbinger]

Just lookin forwards to shin hati. Got a feeling those acolyte figs are gonna be peg warming worse than lando figs.

[Sean C]

Will this finally kill the Retro Collection? Mostly boring looking female characters! Collect them all...you have to, it's a boxed set.

[AyaToyBox]

Acolte stuff if the whole wave from the series yep might be Worst than a certain admiral and a certain inquisitor ?

[Cyclopswc]

Quote:

Originally Posted by LeiaOrgana

I kind of feel like people want others to not get into 3D printing by making it sound a lot more difficult and costly than it is. Not even here, I just see it constantly when it's mentioned elsewhere. It feels like weird gatekeeping, haha.

When comparing the price to the HasLab, it may end up costing about the same - but then you have a freakin' 3D printer forever, LOL.

I totally get how it's just easier to buy it - and more power to folks who want it. But this one in particular is getting the "print my own" reaction because size-wise, nothing here is that large so basically any 3D printer can do it with ease. It has very little paint application (don't see much at all). It pretty much looks like it *was* 3D printed.

It's also insanely easy and cheap to get Star Wars designs. Besides free ones, there are people like Landspeeder Luke who have small Patreon fees which let you access their whole library.

Yes, there is a small learning curve - but most of the newer ones have so many convenience features that it's just a matter of watching a few YouTube videos, even to replace parts, these days.

Again, I totally get why it wouldn't be worth it for some folks - but just in general, what you can 3D print is truly rivaling what they are offering and this is a great example of that.

Nobody WANT you to do anything. If people are saying the same thing every where, maybe it's just the truth. Why would anyone "gatekeep" you from 3D printing? You do what you want.

[firmpulse]

Quote:

Originally Posted by LeiaOrgana

I kind of feel like people want others to not get into 3D printing by making it sound a lot more difficult and costly than it is. Not even here, I just see it constantly when it's mentioned elsewhere. It feels like weird gatekeeping, haha.

When comparing the price to the HasLab, it may end up costing about the same - but then you have a freakin' 3D printer forever, LOL.

I totally get how it's just easier to buy it - and more power to folks who want it. But this one in particular is getting the "print my own" reaction because size-wise, nothing here is that large so basically any 3D printer can do it with ease. It has very little paint application (don't see much at all). It pretty much looks like it *was* 3D printed.

It's also insanely easy and cheap to get Star Wars designs. Besides free ones, there are people like Landspeeder Luke who have small Patreon fees which let you access their whole library.

Yes, there is a small learning curve - but most of the newer ones have so many convenience features that it's just a matter of watching a few YouTube videos, even to replace parts, these days.

Again, I totally get why it wouldn't be worth it for some folks - but just in general, what you can 3D print is truly rivaling what they are offering and this is a great example of that.

"Gatekeeping"? That's a bit...sorry...but, absurd. Mentioning the cost of materials is pertinent. Since you brought it up, sure...you have a 3d Printer "forever". However, you still have to buy one. Which, for a good one would be much more than the cost of this HasLab. If you want print items that "rival" injection molding you will spend WAY more. In addition to all that one still has to buy the STLs, providing they can be found. Only then does the "learning curve" come into play.

[ThorOdinson123]

The Ollies exclusive Acolyte figures are up for pre-order everywhere. I know most of the posters won't buy them but figured id mention

[Black Arbor]

Quote:

Originally Posted by ThorOdinson123

The Ollies exclusive Acolyte figures are up for pre-order everywhere. I know most of the posters won't buy them but figured id mention

From what I’ve heard if the show, and the stock I’ve seen at Ollie’s, they probably won’t even want these duds of figures haha

[Darth Revan]

I didn't even watch Ahsoka but will probably get that shin hati figure. I don't know why that figure did not come with a cloak from the beginning. Baylan Skoll too.

[Darth Revan]

Quote:

Originally Posted by Black Arbor

From what I’ve heard if the show, and the stock I’ve seen at Ollie’s, they probably won’t even want these duds of figures haha

The only character that looks remotely interesting, is that sith lord. At least until they screw it up somehow.

[Harbinger]

Quote:

Originally Posted by Darth Revan

I didn't even watch Ahsoka but will probably get that shin hati figure. I don't know why that figure did not come with a cloak from the beginning. Baylan Skoll too.

Its hasbro dude. More importantly is swb, double dipping is their mo.

[Harbinger]

Quote:

Originally Posted by Darth Revan

The only character that looks remotely interesting, is that sith lord. At least until they screw it up somehow.

The cloak will open to reveal three ewoks standing on each others shoulderw.

[Darth Revan]

Quote:

Originally Posted by Harbinger

Its hasbro dude. More importantly is swb, double dipping is their mo.

More like quadruple dipping, I know they unfortunately release the same character multiple times with one new accessory each release which is kind of a waste of time, plastic and money but they do it anyway. An ultimate version of every character should exist.

[Harbinger]

Quote:

Originally Posted by Darth Revan

More like quadruple dipping, I know they unfortunately release the same character multiple times with one new accessory each release which is kind of a waste of time, plastic and money but they do it anyway. An ultimate version of every character should exist.

Its like the simpsons malibu stacey ep where all she had was a new hat. Haha

[firmpulse]

Quote:

Originally Posted by Harbinger

The cloak will open to reveal three ewoks standing on each others shoulderw.

That would be more interesting then anything they've done in the last 5 years.

[Darth Revan]

Quote:

Originally Posted by Harbinger

Its like the simpsons malibu stacey ep where all she had was a new hat. Haha

Is that the episode where the "new paintjobs" meme came from? Yep, I just youtubed it.

[GAUGE0001]

Just what I always wanted!!! YES!!!

Now I can re-inact my all time favorite Acolyte Episode 3 scene: "The Power of 1! The Power of 2! THE POWER OF MANYYYYYYY"!!!

Okay...In all seriousness. These are all going to peg warm sooooo hard.

I don't feel bad for Disney at all.

[firmpulse]

Quote:

Originally Posted by GAUGE0001

I don't feel bad for Disney at all.

The fact they are still making the same stupid mistakes over and over is mind boggling. I guess it'll all be the fans' fault again when NO ONE buys these.

[Harbinger]

Quote:

Originally Posted by firmpulse

The fact they are still making the same stupid mistakes over and over is mind boggling. I guess it'll all be the fans' fault again when NO ONE buys these.

I may, i stress MAY, get that carrie ann moss fig. Its sad the only 8nteresting character (moss) last less than darth maul on screen. And this whole thread thing? What the fuck is next, a goddamn lightsaber sewing machine? light saber knitting needles?

[ThorOdinson123]

I got blocked by Yakface on twitter today because he was showing off a black series Acolyte stranger RP helmet and I commented it was going to an Ollie's near you.



What a dumb reason to block someone and you know I was right.

My post got 20+ likes too

[Cyclopswc]

Quote:

Originally Posted by ThorOdinson123

I got blocked by Yakface on twitter today because he was showing off a black series Acolyte stranger RP helmet and I commented it was going to an Ollie's near you.



What a dumb reason to block someone and you know I was right.

My post got 20+ likes too

So you can only comment if you LIKE something? Where are we, China?

I agree with you, those are going to be at Ollies...except I'll never find them.

[snake5289]

That's a dumb looking helmet.